Axial 1/24 AX24 XC-1 4WS Crawler Brushed RTR, Orange

.mediaFeature [padding:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]



Features

Three 4-wheel steering (4WS) modes provide motorists new surface conquering ability.

Side plate chassis enables greater articulation for enhanced handling over rough terrain.

LED rock lights mounted in the rock sliders keep your course visible in low light.

Long travel coilover shocks keep wheels on the ground to maximize traction.

4-Link front and rear suspension minimizes axle steer and torque twist.

Front and rear lockers with worm gear setup increase ground clearance.

Steel front and rear axles, stub axles, and pet dog bones supply strength.

Splined and sleeved drive shafts increase suspension travel.

Hinged body system uses simple access to on-board components.

Rockster wheels and Rock Lizards tires produce trail-taming traction.

No bushings — entire car features sealed bearings.

Dynamite 88T motor offers the torque to dominate high climbs.

Fully geared up — you can hit the road practically immediately!





Overview
Every weekend, groups of off-road rock crawling lovers gather to follow routes toward destinations far gotten rid of from the modern world. Their journey's end will reward them with lovely views that just a select few ever see. But the very best memories are made during the journey itself.

Within this community are the severe crawlers. Where others see rocks, roots, and barriers, they see puzzle pieces that form a line to navigate up, over, and beyond. It doesn't matter if many people would have trouble getting through on foot, let alone on wheels. Severe crawlers have such a deep connection to their rig that they know when it can be pushed to new limits.

The 1/24 scale Axial AX24 XC-1 speaks to the severe crawlers, and to everyone who wants to be one. With the AX24 XC-1, you'll be able to crawl over bigger challenges and pull tougher lines than you can with any other 1/24 scale rig.

The new AX24 platform offers stability, resilience, high clearance, generous articulation, and everything else severe rock crawling lovers need to conquer the impossible. Flat chassis side plates with rock sliders assist you move through tight formations. Long travel shocks, a 4-link suspension, and worm gear drivetrain integrate for simple handling, dependable power shipment, and the ability to clear rough terrain.

Then there's the special AX24 4-wheel steering system. Following securely to the line that leads from "here" to "there" has actually never been simpler. Three transmitter-activated steering modes — for no rear tire input, mirrored rear tire input, or "crab crawl" — supply the versatility you need to navigate over or around practically anything in your method. This system gives all motorists new surface conquering ability!

In 2007, Axial broke new ground in severe RC crawling with the 1/10 scale AX10. If you're a veteran Axial fan, you'll love how the AX24 XC-1 pays homage to that famous rig with a reproduction body and livery plus Rockster wheels and Rock Lizards tires.

The AX24 XC-1 isn't simply for skilled RC rock crawling hobbyists (though you'll delight in how it takes on even steeper inclines and bigger challenges than our SCX24 platform rigs). Beginners will find it to be an enjoyable and highly capable mini spider to operate on indoor or outside courses. It's also a fantastic method for full-blown off roading lovers to exercise and fine-tune their skills.

Get ready to press past boundaries and dominate more routes with the Axial AX24 XC-1 Rock Crawler RTR. Since it's completely put together and geared up, you can begin today.





 





 







FOUR-WHEEL STEERING (4WS)
The special AX24 4-wheel steering system gives all motorists new surface conquering ability. Three transmitter-activated modes — no rear tire input, mirrored rear tire input, and "crab crawl" — supply the versatility you need to navigate over or around anything in your method.
 



SIDE PLATE CHASSIS
The durable side plate chassis is crafted to permit high clearance and generous articulation. Angled rock sliders also assist you navigate past rocks, roots, ledges, and other big challenges. Driving the AX24 XC-1, you go where you want to go!
 







LED LIGHTS
LED rock lights mounted in the rock sliders keep your course visible in low light. You'll be able to see and prevail over challenges you may not otherwise area. Day or night, the AX24 XC-1 keeps your adventure alive.
 



COILOVER SHOCK ABSORBERS
Longer, 51mm coilover shocks are new for the AX24 platform. Mounted at an ordinary back angle in the side plate chassis, they permit increased articulation to keep the wheels on the ground and optimizing traction over irregular surface areas.
 






4-LINK FRONT AND REAR SUSPENSION
The suspension geometry utilizes a 4-link design that collaborates with the AX24 side plate chassis to increase articulation and decrease axle steer and torque twist.
 



WORM GEARS
The front and rear axle real estates each have a worm screw and worm gear setup to get power to the axles and create higher ground clearance.
 






DURABLE STEEL AXLES
Steel front and rear axles, stub axles and pet dog bones supply the strength and resilience needed to keep keeping up confidence during difficult climbs and over rough routes.
 



SPLINED DRIVE SHAFTS
The drive shafts are splined and sleeved to allow for maximum suspension travel while keeping the power to the wheels.
 






HINGED BODY SYSTEM
The hinged body system offers quickly, simple access to on-board parts. Its hook-and-loop hinge design lets you reach the chassis and battery just by swinging the body up.
 



ROCKSTER WHEELS & ROCK LIZARDS TIRES
In 2007, the 1/10 scale Axial AX10 platform revolutionized RC crawling. The 1/24 scale AX24 XC-1 pays homage to that groundbreaking rig with a reproduction body and livery, plus 1.0" Rockster wheels and 2.44" Rock Lizards tires for classic appearances and trail-taming traction.
 






FULL BALL BEARINGS
Although the AX24 is smaller sized than numerous other Axial RC crawlers, it still measures up to our highest quality requirements. For example, you'll find no bushings here. The drivetrain spins easily on sealed bearings throughout the entire car.
 



AXIAL AS-1 SERVOS
Axial AS-1 servos are mounted simply above the axle, with servo savers that allow for guiding precision while securing the servo gears in case of a bind or impact.
 






DYNAMITE 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor offers the right amount of torque to dominate high climbs. It's mated to a stamped aluminum motor install to keep flex to a minimum and safeguard the gears.
 



IMPROVED SPEKTRUM SLT3 TRANSMITTER WITH 2-IN-1 SYSTEM
The consisted of Spektrum SLT3 transmitter is ergonomically designed for fatigue-free driving and has a foam wheel for accurate fingertip control. Paired with a Spektrum 2-in-1 ESC/Receiver, its 2.4GHz signal lets you crawl in the company of several other rigs without fretting about interference. A brand-new throttle port functions as an ESC bypass for utilizing aftermarket ESCs without needing to buy a brand-new receiver.
 






 



Requirements

Ball Bearings: Complete Car

Battery: Included

Body: XC-1 Screened

Brakes: Essential with ESC

Battery charger: Included

Chassis: Side Plate

Color Variant: Orange

Completion Level: Ready-To-Run

Adapter Type: PH 2.0 (High-Current Ultra Micro)

Differential: Worm Gear 16T/4T

Drive Type: Forward/Brake/Reverse

Drivetrain: 4WD

Front Track: 4.5 in (113mm)

Ground Clearance: 1.3 in (34mm)

Motor Type: Brushed

Pinion: 11T

Power Type: Electric

Product Height: 3.7" (94 mm)

Product Length: 7.8" (198 mm)

Product Width: 4.5" (114 mm)

Radio: Included

Rear Track: 4.5 in (113mm)

Receiver: Included

Scale: 1/24

Servos: Included

Shock Type: Coil-over 1.35-2.0 in (35-51mm), Plastic

Speed Control: Consisted Of

Stimulate Gear: 55T

Steering Type: 4WS

Suspension: Solid Axle, Front and Back

Tire Tread: Axial Rock Lizards

Car Type: Rock Crawler

Wheel Width: 0.5 in (12.5mm)

Wheelbase: 5.3" (135 mm)