Axial 1/24 AX24 XC-1 4WS Crawler Brushed RTR, Orange

.mediaFeature [padding:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]



Features

3 4-wheel steering (4WS) modes offer motorists new surface dominating ability.

Side plate chassis permits higher expression for enhanced handling over rough terrain.

LED rock lights mounted in the rock sliders keep your course noticeable in low light.

Long travel coilover shocks keep wheels on the ground to make the most of traction.

4-Link front and rear suspension decreases axle guide and torque twist.

Front and rear lockers with worm equipment setup boost ground clearance.

Steel front and rear axles, stub axles, and dog bones supply strength.

Splined and sleeved drive shafts increase suspension travel.

Hinged body system provides easy access to on-board components.

Rockster wheels and Rock Lizards tires produce trail-taming traction.

No bushings — entire vehicle features sealed bearings.

Dynamite 88T motor offers the torque to dominate steep climbs.

Fully equipped — you can take off practically immediately!





Overview
Every weekend, groups of off-road rock crawling lovers collect to follow tracks toward locations far eliminated from the modern world. Their journey's end will reward them with stunning views that only a select few ever see. But the very best memories are made during the journey itself.

Within this community are the extreme crawlers. Where others see rocks, roots, and barriers, they see puzzle pieces that form a line to steer up, over, and beyond. It doesn't matter if most people would have trouble making it through on foot, let alone on wheels. Extreme crawlers have such a deep connection to their rig that they know when it can be pressed to new limits.

The 1/24 scale Axial AX24 XC-1 speaks with the extreme crawlers, and to everyone who wishes to be one. With the AX24 XC-1, you'll have the ability to crawl over larger challenges and pull harder lines than you can with any other 1/24 scale rig.

The new AX24 platform offers stability, durability, high clearance, generous expression, and whatever else extreme rock crawling lovers need to overcome the difficult. Flat chassis side plates with rock sliders help you move through tight formations. Long travel shocks, a 4-link suspension, and worm equipment drivetrain combine for easy handling, reputable power shipment, and the capability to clear rough terrain.

Then there's the unique AX24 4-wheel steering system. Following tightly to the line that leads from "here" to "there" has actually never been much easier. 3 transmitter-activated steering modes — for no rear tire input, mirrored rear tire input, or "crab crawl" — supply the flexibility you need to steer over or around practically anything in your method. This system offers all motorists new surface dominating ability!

In 2007, Axial broke new ground in extreme RC crawling with the 1/10 scale AX10. If you're a long-time Axial fan, you'll like how the AX24 XC-1 pays homage to that famous rig with a replica body and livery plus Rockster wheels and Rock Lizards tires.

The AX24 XC-1 isn't simply for experienced RC rock crawling hobbyists (though you'll take pleasure in how it handles even steeper inclines and larger challenges than our SCX24 platform rigs). Newcomers will find it to be a fun and extremely capable mini spider to work on indoor or outside courses. It's also an excellent method for full-blown off roading lovers to exercise and improve their skills.

Get all set to press past borders and dominate more tracks with the Axial AX24 XC-1 Rock Spider RTR. Due to the fact that it's fully assembled and equipped, you can begin today.





 





 







FOUR-WHEEL STEERING (4WS)
The unique AX24 4-wheel steering system offers all motorists new surface dominating capability. 3 transmitter-activated modes — no rear tire input, mirrored rear tire input, and "crab crawl" — supply the flexibility you need to steer over or around anything in your method.
 



SIDE PLATE CHASSIS
The long lasting side plate chassis is engineered to allow high clearance and generous expression. Angled rock sliders also help you steer past rocks, roots, ledges, and other large challenges. Driving the AX24 XC-1, you go where you wish to go!
 







LED LIGHTS
LED rock lights mounted in the rock sliders keep your course noticeable in low light. You'll have the ability to see and prevail over challenges you may not otherwise area. Day or night, the AX24 XC-1 keeps your experience alive.
 



COILOVER SHOCK ABSORBERS
Longer, 51mm coilover shocks are new for the AX24 platform. Installed at a lay back angle in the side plate chassis, they allow increased expression to keep the wheels on the ground and maximizing traction over unequal surfaces.
 






4-LINK FRONT AND REAR SUSPENSION
The suspension geometry utilizes a 4-link style that collaborates with the AX24 side plate chassis to increase expression and decrease axle guide and torque twist.
 



WORM GEARS
The front and rear axle housings each have a worm screw and worm equipment setup to get power to the axles and produce higher ground clearance.
 






DURABLE STEEL AXLES
Steel front and rear axles, stub axles and dog bones supply the strength and durability required to keep keeping up self-confidence during tough climbs and over rough tracks.
 



SPLINED DRIVE SHAFTS
The drive shafts are splined and sleeved to enable maximum suspension travel while keeping the power to the wheels.
 






HINGED BODY SYSTEM
The hinged body system offers quick, easy access to on-board components. Its hook-and-loop hinge style lets you reach the chassis and battery just by swinging the body up.
 



ROCKSTER WHEELS & ROCK LIZARDS TIRES
In 2007, the 1/10 scale Axial AX10 platform reinvented RC crawling. The 1/24 scale AX24 XC-1 pays homage to that groundbreaking rig with a replica body and livery, plus 1.0" Rockster wheels and 2.44" Rock Lizards tires for classic appearances and trail-taming traction.
 






FULL BALL BEARINGS
Although the AX24 is smaller sized than lots of other Axial RC crawlers, it still determines up to our highest quality requirements. For instance, you'll find no bushings here. The drivetrain spins easily on sealed bearings throughout the entire vehicle.
 



AXIAL AS-1 SERVOS
Axial AS-1 servos are mounted simply above the axle, with servo savers that enable steering accuracy while securing the servo gears in case of a bind or effect.
 






DYNAMITE 88T BRUSHED MOTOR
The Dynamite 88T brushed electrical motor offers the right amount of torque to dominate steep climbs. It's mated to a stamped aluminum motor mount to keep flex to a minimum and safeguard the gears.
 



IMPROVED SPEKTRUM SLT3 TRANSMITTER WITH 2-IN-1 SYSTEM
The included Spektrum SLT3 transmitter is ergonomically created for fatigue-free driving and has a foam wheel for exact fingertip control. Paired with a Spektrum 2-in-1 ESC/Receiver, its 2.4GHz signal lets you crawl in the company of several other rigs without worrying about interference. A brand-new throttle port works as an ESC bypass for using aftermarket ESCs without needing to purchase a new receiver.
 






 



Requirements

Ball Bearings: Complete Lorry

Battery: Included

Body: XC-1 Screened

Brakes: Essential with ESC

Charger: Included

Chassis: Side Plate

Color Variant: Orange

Completion Level: Ready-To-Run

Adapter Type: PH 2.0 (High-Current Ultra Micro)

Differential: Worm Equipment 16T/4T

Drive Type: Forward/Brake/Reverse

Drivetrain: 4WD

Front Track: 4.5 in (113mm)

Ground Clearance: 1.3 in (34mm)

Motor Type: Brushed

Pinion: 11T

Power Type: Electric

Item Height: 3.7" (94 mm)

Item Length: 7.8" (198 mm)

Item Width: 4.5" (114 mm)

Radio: Included

Rear Track: 4.5 in (113mm)

Receiver: Included

Scale: 1/24

Servos: Included

Shock Type: Coil-over 1.35-2.0 in (35-51mm), Plastic

Speed Control: Included

Stimulate Equipment: 55T

Steering Type: 4WS

Suspension: Solid Axle, Front and Back

Tire Tread: Axial Rock Lizards

Lorry Type: Rock Spider

Wheel Width: 0.5 in (12.5mm)

Wheelbase: 5.3" (135 mm)