Axial 1/24 AX24 XC-1 4WS Crawler Brushed RTR, Orange

.mediaFeature [padding:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]



Features

3 4-wheel steering (4WS) modes give motorists new terrain conquering ability.

Side plate chassis permits higher articulation for enhanced handling over rough terrain.

LED rock lights mounted in the rock sliders keep your path noticeable in low light.

Long travel coilover shocks keep wheels on the ground to optimize traction.

4-Link front and rear suspension lowers axle steer and torque twist.

Front and rear lockers with worm equipment setup boost ground clearance.

Steel front and rear axles, stub axles, and canine bones provide strength.

Splined and sleeved drive shafts increase suspension travel.

Hinged body system offers simple access to on-board components.

Rockster wheels and Rock Lizards tires produce trail-taming traction.

No bushings — whole vehicle features sealed bearings.

Dynamite 88T motor offers the torque to dominate steep climbs.

Fully equipped — you can take off practically immediately!





Overview
Every weekend, groups of off-road rock crawling enthusiasts gather to follow trails towards locations far removed from the modern-day world. Their journey's end will reward them with gorgeous views that only a choose couple of ever see. But the very best memories are made during the journey itself.

Within this neighborhood are the severe spiders. Where others see rocks, roots, and barriers, they see puzzle pieces that form a line to navigate up, over, and beyond. It doesn't matter if many people would have problem making it through on foot, let alone on wheels. Severe spiders have such a deep connection to their rig that they understand when it can be pressed to new limits.

The 1/24 scale Axial AX24 XC-1 talks to the severe spiders, and to everyone who wishes to be one. With the AX24 XC-1, you'll have the ability to crawl over bigger challenges and pull tougher lines than you can with any other 1/24 scale rig.

The new AX24 platform offers stability, durability, high clearance, generous articulation, and whatever else severe rock crawling enthusiasts need to overcome the difficult. Flat chassis side plates with rock sliders help you move through tight developments. Long travel shocks, a 4-link suspension, and worm equipment drivetrain integrate for simple handling, reputable power delivery, and the ability to clear rough terrain.

Then there's the special AX24 4-wheel steering system. Following tightly to the line that leads from "here" to "there" has never been simpler. 3 transmitter-activated steering modes — for no rear tire input, mirrored rear tire input, or "crab crawl" — provide the flexibility you need to navigate over or around practically anything in your method. This system gives all motorists new terrain conquering ability!

In 2007, Axial broke new ground in severe RC crawling with the 1/10 scale AX10. If you're a long-time Axial fan, you'll love how the AX24 XC-1 admires that famous rig with a replica body and livery plus Rockster wheels and Rock Lizards tires.

The AX24 XC-1 isn't just for experienced RC rock crawling hobbyists (though you'll delight in how it handles even steeper slopes and bigger challenges than our SCX24 platform rigs). Newbies will discover it to be a fun and highly capable mini spider to work on indoor or outdoor courses. It's likewise a great method for full-blown off roading enthusiasts to exercise and improve their skills.

Get all set to press past boundaries and dominate more trails with the Axial AX24 XC-1 Rock Crawler RTR. Because it's totally put together and equipped, you can start today.





 





 







FOUR-WHEEL STEERING (4WS)
The special AX24 4-wheel steering system gives all motorists new terrain conquering ability. 3 transmitter-activated modes — no rear tire input, mirrored rear tire input, and "crab crawl" — provide the flexibility you need to navigate over or around anything in your method.
 



SIDE PLATE CHASSIS
The long lasting side plate chassis is engineered to enable high clearance and generous articulation. Angled rock sliders likewise help you navigate past rocks, roots, ledges, and other large challenges. Driving the AX24 XC-1, you go where you wish to go!
 







LED LIGHTS
LED rock lights mounted in the rock sliders keep your path noticeable in low light. You'll have the ability to see and prevail over challenges you might not otherwise area. Day or night, the AX24 XC-1 keeps your experience alive.
 



COILOVER SHOCK ABSORBERS
Longer, 51mm coilover shocks are new for the AX24 platform. Installed at a lay back angle in the side plate chassis, they enable increased articulation to keep the wheels on the ground and taking full advantage of traction over unequal surfaces.
 






4-LINK FRONT AND REAR SUSPENSION
The suspension geometry utilizes a 4-link style that interacts with the AX24 side plate chassis to increase articulation and lower axle steer and torque twist.
 



WORM GEARS
The front and rear axle real estates each have a worm screw and worm equipment setup to get power to the axles and create greater ground clearance.
 






DURABLE STEEL AXLES
Steel front and rear axles, stub axles and canine bones provide the strength and durability required to keep keeping up confidence during tough climbs and over rough trails.
 



SPLINED DRIVE SHAFTS
The drive shafts are splined and sleeved to enable maximum suspension travel while keeping the power to the wheels.
 






HINGED BODY SYSTEM
The hinged body system offers fast, simple access to on-board parts. Its hook-and-loop hinge style lets you reach the chassis and battery merely by swinging the body up.
 



ROCKSTER WHEELS & ROCK LIZARDS TIRES
In 2007, the 1/10 scale Axial AX10 platform changed RC crawling. The 1/24 scale AX24 XC-1 admires that groundbreaking rig with a replica body and livery, plus 1.0" Rockster wheels and 2.44" Rock Lizards tires for sentimental looks and trail-taming traction.
 






FULL BALL BEARINGS
Although the AX24 is smaller sized than many other Axial RC spiders, it still determines up to our highest quality requirements. For instance, you'll discover no bushings here. The drivetrain spins freely on sealed bearings throughout the whole vehicle.
 



AXIAL AS-1 SERVOS
Axial AS-1 servos are mounted just above the axle, with servo savers that enable guiding accuracy while protecting the servo equipments in the event of a bind or effect.
 






DYNAMITE 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor offers the correct amount of torque to dominate steep climbs. It's mated to a stamped aluminum motor mount to keep flex to a minimum and safeguard the equipments.
 



IMPROVED SPEKTRUM SLT3 TRANSMITTER WITH 2-IN-1 SYSTEM
The consisted of Spektrum SLT3 transmitter is ergonomically developed for fatigue-free driving and has a foam wheel for accurate fingertip control. Paired with a Spektrum 2-in-1 ESC/Receiver, its 2.4GHz signal lets you crawl in the business of several other rigs without stressing over disturbance. A brand-new throttle port functions as an ESC bypass for utilizing aftermarket ESCs without having to buy a brand-new receiver.
 






 



Specifications

Ball Bearings: Total Lorry

Battery: Consisted of

Body: XC-1 Evaluated

Brakes: Essential with ESC

Charger: Consisted of

Chassis: Side Plate

Color Alternative: Orange

Conclusion Level: Ready-To-Run

Port Type: PH 2.0 (High-Current Ultra Micro)

Differential: Worm Gear 16T/4T

Drive Type: Forward/Brake/Reverse

Drivetrain: 4WD

Front Track: 4.5 in (113mm)

Ground Clearance: 1.3 in (34mm)

Motor Type: Brushed

Pinion: 11T

Power Type: Electric

Product Height: 3.7" (94 mm)

Product Length: 7.8" (198 mm)

Product Width: 4.5" (114 mm)

Radio: Consisted of

Rear Track: 4.5 in (113mm)

Receiver: Consisted of

Scale: 1/24

Servos: Consisted of

Shock Type: Coil-over 1.35-2.0 in (35-51mm), Plastic

Speed Control: Consisted Of

Spur Gear: 55T

Guiding Type: 4WS

Suspension: Solid Axle, Front and Back

Tire Tread: Axial Rock Lizards

Lorry Type: Rock Crawler

Wheel Width: 0.5 in (12.5mm)

Wheelbase: 5.3" (135 mm)