Axial 1/24 AX24 XC-1 4WS Crawler Brushed RTR, Green

.mediaFeature [padding:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]



Features

Three 4-wheel steering (4WS) modes provide chauffeurs brand-new surface conquering ability.

Side plate chassis allows higher articulation for improved handling over rough terrain.

LED rock lights mounted in the rock sliders keep your path noticeable in low light.

Long travel coilover shocks keep wheels on the ground to make the most of traction.

4-Link front and rear suspension lowers axle guide and torque twist.

Front and rear lockers with worm gear setup increase ground clearance.

Steel front and rear axles, stub axles, and pet dog bones offer strength.

Splined and sleeved drive shafts increase suspension travel.

Hinged body system provides simple access to on-board components.

Rockster wheels and Rock Lizards tires produce trail-taming traction.

No bushings — whole car functions sealed bearings.

Dynamite 88T motor offers the torque to dominate high climbs.

Fully equipped — you can hit the road almost immediately!





Overview
Every weekend, groups of off-road rock crawling enthusiasts gather to follow trails towards destinations far eliminated from the modern world. Their journey's end will reward them with lovely views that just a choose couple of ever see. But the best memories are made during the journey itself.

Within this community are the extreme crawlers. Where others see rocks, roots, and barriers, they see puzzle pieces that form a line to navigate up, over, and beyond. It doesn't matter if most people would have problem making it through on foot, not to mention on wheels. Extreme crawlers have such a deep connection to their rig that they know when it can be pressed to brand-new limits.

The 1/24 scale Axial AX24 XC-1 talks to the extreme crawlers, and to everybody who wishes to be one. With the AX24 XC-1, you'll have the ability to crawl over bigger barriers and pull tougher lines than you can with any other 1/24 scale rig.

The brand-new AX24 platform offers stability, durability, high clearance, generous articulation, and everything else extreme rock crawling enthusiasts need to get rid of the impossible. Flat chassis side plates with rock sliders assist you move through tight formations. Long travel shocks, a 4-link suspension, and worm gear drivetrain combine for simple handling, reputable power shipment, and the capability to clear rough terrain.

Then there's the special AX24 4-wheel steering system. Following securely to the line that leads from "here" to "there" has actually never been easier. Three transmitter-activated steering modes — for no rear tire input, mirrored rear tire input, or "crab crawl" — offer the flexibility you need to navigate over or around almost anything in your way. This system provides all chauffeurs brand-new surface conquering ability!

In 2007, Axial broke brand-new ground in extreme RC crawling with the 1/10 scale AX10. If you're a long-time Axial fan, you'll love how the AX24 XC-1 pays homage to that legendary rig with a replica body and livery plus Rockster wheels and Rock Lizards tires.

The AX24 XC-1 isn't just for skilled RC rock crawling enthusiasts (though you'll enjoy how it takes on even steeper inclines and bigger barriers than our SCX24 platform rigs). Newbies will find it to be a fun and highly capable mini crawler to work on indoor or outside courses. It's likewise a terrific way for major off roading enthusiasts to work out and refine their skills.

Get all set to press past borders and dominate more trails with the Axial AX24 XC-1 Rock Crawler RTR. Because it's fully put together and equipped, you can begin today.





 





 







FOUR-WHEEL STEERING (4WS)
The special AX24 4-wheel steering system provides all chauffeurs brand-new surface conquering capability. Three transmitter-activated modes — no rear tire input, mirrored rear tire input, and "crab crawl" — offer the flexibility you need to navigate over or around anything in your way.
 



SIDE PLATE CHASSIS
The durable side plate chassis is crafted to permit high clearance and generous articulation. Angled rock sliders likewise assist you navigate past rocks, roots, ledges, and other large barriers. Driving the AX24 XC-1, you go where you wish to go!
 







LED LIGHTS
LED rock lights mounted in the rock sliders keep your path noticeable in low light. You'll have the ability to see and prevail over barriers you may not otherwise area. Day or night, the AX24 XC-1 keeps your experience alive.
 



COILOVER SHOCK ABSORBERS
Longer, 51mm coilover shocks are brand-new for the AX24 platform. Installed at a lay back angle in the side plate chassis, they permit increased articulation to keep the wheels on the ground and taking full advantage of traction over unequal surface areas.
 






4-LINK FRONT AND REAR SUSPENSION
The suspension geometry uses a 4-link design that interacts with the AX24 side plate chassis to increase articulation and minimize axle guide and torque twist.
 



WORM GEARS
The front and rear axle housings each have a worm screw and worm gear setup to get power to the axles and develop greater ground clearance.
 






DURABLE STEEL AXLES
Steel front and rear axles, stub axles and pet dog bones offer the strength and durability needed to keep keeping up self-confidence during tough climbs and over rough trails.
 



SPLINED DRIVE SHAFTS
The drive shafts are splined and sleeved to permit optimal suspension travel while keeping the power to the wheels.
 






HINGED BODY SYSTEM
The hinged body system offers quickly, simple access to on-board parts. Its hook-and-loop hinge design lets you reach the chassis and battery simply by swinging the body up.
 



ROCKSTER WHEELS & ROCK LIZARDS TIRES
In 2007, the 1/10 scale Axial AX10 platform changed RC crawling. The 1/24 scale AX24 XC-1 pays homage to that groundbreaking rig with a replica body and livery, plus 1.0" Rockster wheels and 2.44" Rock Lizards tires for classic appearances and trail-taming traction.
 






FULL BALL BEARINGS
Although the AX24 is smaller sized than many other Axial RC crawlers, it still measures up to our greatest quality requirements. For instance, you'll find no bushings here. The drivetrain spins freely on sealed bearings throughout the whole car.
 



AXIAL AS-1 SERVOS
Axial AS-1 servos are mounted just above the axle, with servo savers that permit guiding precision while safeguarding the servo gears in case of a bind or impact.
 






DYNAMITE 88T BRUSHED MOTOR
The Dynamite 88T brushed electrical motor offers the right amount of torque to dominate high climbs. It's mated to a stamped aluminum motor mount to keep flex to a minimum and safeguard the gears.
 



IMPROVED SPEKTRUM SLT3 TRANSMITTER WITH 2-IN-1 SYSTEM
The included Spektrum SLT3 transmitter is ergonomically created for fatigue-free driving and has a foam wheel for exact fingertip control. Paired with a Spektrum 2-in-1 ESC/Receiver, its 2.4GHz signal lets you crawl in the business of multiple other rigs without worrying about interference. A brand-new throttle port works as an ESC bypass for using aftermarket ESCs without having to purchase a new receiver.
 






 



Requirements

Ball Bearings: Complete Lorry

Battery: Included

Body: XC-1 Screened

Brakes: Integral with ESC

Battery charger: Included

Chassis: Side Plate

Color Alternative: Green

Conclusion Level: Ready-To-Run

Connector Type: PH 2.0 (High-Current Ultra Micro)

Differential: Worm Equipment 16T/4T

Drive Type: Forward/Brake/Reverse

Drivetrain: 4WD

Front Track: 4.5 in (113mm)

Ground Clearance: 1.3 in (34mm)

Motor Type: Brushed

Pinion: 11T

Power Type: Electric

Product Height: 3.7" (94 mm)

Product Length: 7.8" (198 mm)

Product Width: 4.5" (114 mm)

Radio: Included

Rear Track: 4.5 in (113mm)

Receiver: Included

Scale: 1/24

Servos: Included

Shock Type: Coil-over 1.35-2.0 in (35-51mm), Plastic

Speed Control: Consisted Of

Spur Equipment: 55T

Guiding Type: 4WS

Suspension: Solid Axle, Front and Rear

Tire Tread: Axial Rock Lizards

Lorry Type: Rock Crawler

Wheel Width: 0.5 in (12.5mm)

Wheelbase: 5.3" (135 mm)