Axial 1/24 AX24 XC-1 4WS Crawler Brushed RTR, Green

.mediaFeature [padding:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]



Features

Three 4-wheel steering (4WS) modes give drivers new terrain dominating ability.

Side plate chassis permits greater expression for enhanced handling over rough terrain.

LED rock lights installed in the rock sliders keep your path visible in low light.

Long travel coilover shocks keep wheels on the ground to take full advantage of traction.

4-Link front and rear suspension reduces axle guide and torque twist.

Front and rear lockers with worm equipment setup increase ground clearance.

Steel front and rear axles, stub axles, and pet bones offer strength.

Splined and sleeved drive shafts increase suspension travel.

Hinged body system provides easy access to on-board components.

Rockster wheels and Rock Lizards tires produce trail-taming traction.

No bushings — whole automobile functions sealed bearings.

Dynamite 88T motor supplies the torque to dominate steep climbs.

Fully equipped — you can take off practically immediately!





Overview
Every weekend, groups of off-road rock crawling enthusiasts gather to follow trails towards destinations far gotten rid of from the modern world. Their journey's end will reward them with gorgeous views that only a choose couple of ever see. However the very best memories are made during the journey itself.

Within this neighborhood are the extreme spiders. Where others see rocks, roots, and barriers, they see puzzle pieces that form a line to steer up, over, and beyond. It doesn't matter if most people would have problem surviving on foot, not to mention on wheels. Severe spiders have such a deep connection to their rig that they know when it can be pressed to new limits.

The 1/24 scale Axial AX24 XC-1 speaks with the extreme spiders, and to everybody who wants to be one. With the AX24 XC-1, you'll be able to crawl over bigger challenges and pull harder lines than you can with any other 1/24 scale rig.

The new AX24 platform supplies stability, sturdiness, high clearance, generous expression, and everything else extreme rock crawling enthusiasts require to conquer the impossible. Flat chassis side plates with rock sliders help you move through tight developments. Long travel shocks, a 4-link suspension, and worm equipment drivetrain integrate for easy handling, dependable power delivery, and the ability to clear rough terrain.

Then there's the special AX24 4-wheel steering system. Following tightly to the line that leads from "here" to "there" has never been simpler. Three transmitter-activated steering modes — for no rear tire input, mirrored rear tire input, or "crab crawl" — offer the versatility you require to steer over or around practically anything in your method. This system gives all drivers new terrain dominating ability!

In 2007, Axial broke new ground in extreme RC crawling with the 1/10 scale AX10. If you're a long-time Axial fan, you'll enjoy how the AX24 XC-1 pays homage to that famous rig with a replica body and livery plus Rockster wheels and Rock Lizards tires.

The AX24 XC-1 isn't just for skilled RC rock crawling enthusiasts (though you'll delight in how it handles even steeper inclines and bigger challenges than our SCX24 platform rigs). Newbies will discover it to be an enjoyable and extremely capable mini spider to run on indoor or outdoor courses. It's also a great method for major off roading enthusiasts to work out and refine their skills.

Get all set to push past borders and dominate more trails with the Axial AX24 XC-1 Rock Crawler RTR. Because it's totally assembled and equipped, you can begin today.





 





 







FOUR-WHEEL STEERING (4WS)
The special AX24 4-wheel steering system gives all drivers new terrain dominating ability. Three transmitter-activated modes — no rear tire input, mirrored rear tire input, and "crab crawl" — offer the versatility you require to steer over or around anything in your method.
 



SIDE PLATE CHASSIS
The durable side plate chassis is crafted to enable high clearance and generous expression. Angled rock sliders also help you steer past rocks, roots, ledges, and other big challenges. Driving the AX24 XC-1, you go where you want to go!
 







LED LIGHTS
LED rock lights installed in the rock sliders keep your path visible in low light. You'll be able to see and surmount challenges you might not otherwise area. Day or night, the AX24 XC-1 keeps your experience alive.
 



COILOVER SHOCK ABSORBERS
Longer, 51mm coilover shocks are new for the AX24 platform. Installed at an ordinary back angle in the side plate chassis, they enable increased expression to keep the wheels on the ground and making the most of traction over unequal surface areas.
 






4-LINK FRONT AND REAR SUSPENSION
The suspension geometry utilizes a 4-link design that works together with the AX24 side plate chassis to increase expression and reduce axle guide and torque twist.
 



WORM GEARS
The front and rear axle housings each have a worm screw and worm equipment setup to get power to the axles and develop greater ground clearance.
 






DURABLE STEEL AXLES
Steel front and rear axles, stub axles and pet bones offer the strength and sturdiness needed to keep running with self-confidence during hard climbs and over rough trails.
 



SPLINED DRIVE SHAFTS
The drive shafts are splined and sleeved to allow for optimal suspension travel while keeping the power to the wheels.
 






HINGED BODY SYSTEM
The hinged body system supplies quick, easy access to on-board elements. Its hook-and-loop hinge design lets you reach the chassis and battery merely by swinging the body up.
 



ROCKSTER WHEELS & ROCK LIZARDS TIRES
In 2007, the 1/10 scale Axial AX10 platform transformed RC crawling. The 1/24 scale AX24 XC-1 pays homage to that groundbreaking rig with a replica body and livery, plus 1.0" Rockster wheels and 2.44" Rock Lizards tires for classic appearances and trail-taming traction.
 






FULL BALL BEARINGS
Although the AX24 is smaller than lots of other Axial RC spiders, it still determines up to our greatest quality requirements. For instance, you'll discover no bushings here. The drivetrain spins freely on sealed bearings throughout the whole automobile.
 



AXIAL AS-1 SERVOS
Axial AS-1 servos are installed just above the axle, with servo savers that allow for guiding accuracy while securing the servo gears in case of a bind or impact.
 






DYNAMITE 88T BRUSHED MOTOR
The Dynamite 88T brushed electric motor supplies the correct amount of torque to dominate steep climbs. It's mated to a stamped aluminum motor mount to keep flex to a minimum and secure the gears.
 



IMPROVED SPEKTRUM SLT3 TRANSMITTER WITH 2-IN-1 SYSTEM
The consisted of Spektrum SLT3 transmitter is ergonomically created for fatigue-free driving and has a foam wheel for exact fingertip control. Paired with a Spektrum 2-in-1 ESC/Receiver, its 2.4GHz signal lets you crawl in the business of several other rigs without fretting about disturbance. A brand-new throttle port serves as an ESC bypass for utilizing aftermarket ESCs without needing to buy a new receiver.
 






 



Specifications

Ball Bearings: Complete Lorry

Battery: Included

Body: XC-1 Evaluated

Brakes: Essential with ESC

Charger: Included

Chassis: Side Plate

Color Variant: Green

Completion Level: Ready-To-Run

Connector Type: PH 2.0 (High-Current Ultra Micro)

Differential: Worm Gear 16T/4T

Drive Type: Forward/Brake/Reverse

Drivetrain: 4WD

Front Track: 4.5 in (113mm)

Ground Clearance: 1.3 in (34mm)

Motor Type: Brushed

Pinion: 11T

Power Type: Electric

Item Height: 3.7" (94 mm)

Item Length: 7.8" (198 mm)

Item Width: 4.5" (114 mm)

Radio: Included

Rear Track: 4.5 in (113mm)

Receiver: Included

Scale: 1/24

Servos: Included

Shock Type: Coil-over 1.35-2.0 in (35-51mm), Plastic

Speed Control: Consisted Of

Stimulate Gear: 55T

Steering Type: 4WS

Suspension: Solid Axle, Front and Rear

Tire Tread: Axial Rock Lizards

Lorry Type: Rock Crawler

Wheel Width: 0.5 in (12.5mm)

Wheelbase: 5.3" (135 mm)