Axial 1/10 SCX10 III Jeep JL Wrangler with Portals 4WD Kit

.mediaFeature [padding:2px 0;]
.safeTech [background:#6f92a5; float:left; padding:10px; margin:10px; font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]









Features

Reproduction V8 engine, transmission housing and transfer case cover and safeguard the motor while improving scale look

Chassis tray accepts full-size, basic LiPo or NiMH batteries, with area on the side rails for running little pack sizes

DIG function transmission setup lets you lock the rear axle from the transmitter for front wheel drive and a tighter turning radius

Two-speed transmission setup option likewise readily available for low and high speeds

Portal axles increase ground clearance and decrease torque twist

Adjustable wheelbase chassis permits each chauffeur to pick the size of their chassis

Inner fenders and floor sides conceal internal elements typically noticeable from the side of the chassis

Licensed KMC Machete 3-piece beadlock wheels offer scale looks and let you get rid of and replace tires without gluing

Formally certified Nitto Trail Grappler tires in a brand-new taller and broader size increase ground clearance and grip

Fully rebuildable, oil-filled shocks include tough anodized, threaded shock bodies, coilover springs, and an emulsion-style cap with screw for much easier rebuilds

Clear scale Jeep® Wrangler Unlimited body with in-depth interior





Overview
The 1/10 scale Axial® SCX10T III Jeep® JL Wrangler 4WD set marks the next step forward in scale off-road action. While continuing to include crucial elements that have actually made SCX10T automobiles effective, the SCX10T III increases chassis realism with details that include a replica V8 engine to house the front-mounted 540 motor. It's mated to a practical transmission housing and transfer case, like a 1:1 vehicle.
The set's flexible transmission can be built in a number of ways. If you're using a 3-channel radio like the SpektrumT DX3T, you can set it up with a third-channel DIG function that lets you lock the rear axle from the transmitter for front wheel drive and a tighter turning radius. Another 3-channel option is to set up the car with a two-speed transmission to pick between low and high speeds. To have access to the two-speed transmission and DIG function simultaneously, simply add another servo and utilize a radio with at least four channels (such as the 5-channel SpektrumT DX5).
The SCX10T III Jeep® JL Wrangler set uses portal axles to enhance performance by increasing the ground clearance and minimizing torque twist. Its basic battery tray accepts full-size basic LiPo or NiMH packs. There's likewise area on the side rails for drivers who choose "shorty" loads. Inner fenders and floor sides conceal internal elements that would typically show up from the side of the chassis.
To complete the chassis, the set comes with a clear Jeep® Wrangler Unlimited four-door body that's prepared for completing however you like. Scale details include a roll cage, front hood vents and cowl, windscreen wipers, mirrors, door manages and more, plus an in-depth interior. New taller and broader, officially certified Nitto Trail Grappler tires on 3-piece licensed KMC Machete beadlock wheels add more scale realism and more grip on dirt, rocks, and all other off-road trails.





Needed to Complete

4-Channel transmitter

4-Channel receiver

Steering servo

ESC (electronic speed controller)

Electric motor

Micro servo for rear dig function

Micro servo for 2-speed function

Battery (accepts basic and shorty packs)

Battery battery charger

AA batteries for transmitter

Paint (for polycarbonate plastic)

What remains in the Box?

(1) Axial® SCX10T III Jeep® JL Wrangler 4WD Kit with clear body

(1) Product Manual





 






SCALE ENGINE DETAIL
Scale functions including a replica V8 engine, transmission housing, and transfer case all cover and safeguard your electric motor while adding to the practical look.
 



MULTIPLE BATTERY MOUNTING LOCATIONS
The SCX10T III Jeep® JL Wrangler has a standard battery tray that accepts full-size basic LiPo or NiMH packs. There's area on the side rails, too, for drivers who choose smaller sized size packs or require additional power for other devices.
 







DIG TRANSMISSION WITH TWO-SPEED OPTION
Utilizing 3-channel control, the set's transmission can be set up one of 2 ways: with low and high speeds or with a DIG function that locks the rear axle from the transmitter on command, for the tighter turning radius of front wheel drive. With another servo and 4-channel control, both options can be offered simultaneously.
 



PORTAL OFFSET AXLE HOUSING WITH HYPOID RING AND PINION GEAR
Portal Axles like those discovered in some full-size off-roaders offer greater ground clearance and decrease the torque on other drivetrain elements for improved performance.
 







ADJUSTABLE WHEELBASE CHASSIS
The SCX10T III Jeep® JL Wrangler set wheelbase is adjustable with optional links, allowing you to pick the wheelbase of your option.
 



OPTIMIZED SUSPENSION GEOMETRY
The suspension geometry is based on the SCX10T II but fine-tuned a little for the new chassis design. The front suspension has been enhanced to decrease bump steer, while the rear 4-link reduces torque twist.
 







CLEAR JEEP WRANGLER UNLIMITED 4-DOOR BODY
The clear scale Jeep® Wrangler Unlimited body mirrors its full-size counterpart with an in-depth interior for "incredibly scale" looks. The interior has a molded roll cage, guiding wheel, and chauffeur head. There are numerous formed scale details on the body, too: front radiator/light buckets; front hood vents; front cowl; windscreen wipers; mirrors; door manages; and fuel door.
 



INNER FENDERS AND FLOOR SIDES
The SCX10T III Jeep® JL Wrangler set body's inner fenders and floor sides conceal internal elements that would typically show up from the side of the chassis. The sealed receiver box can be eliminated to offer you more area for the electronics of your option. An extra tree of body posts is consisted of, allowing you to customize your rig with any 12.3" wheel based bodies.
 







NITTO TRAIL GRAPPLER TIRES
The S30 compound Nitto Trail Grappler tires consisted of with the SCX10T III Jeep® JL Wrangler set are taller and broader (4.74 x 1.7), offering more ground clearance and more grip in the range of terrain that you will find while you're off-roading.
 



LICENSED 3-PIECE BEADLOCK WHEELS
Famous in the off-road world, these officially certified KMC XD Machete wheels are formed in satin chrome and include stunning scale details. Because they're 3-piece beadlock wheels, tires can be mounted, eliminated and changed quickly without gluing.
 







ALUMINUM ADJUSTABLE COILOVER SHOCKS
The oil-filled shocks have clear anodized, threaded bodies, a single coilover spring, plus an emulsion-style cap with screw for much easier rebuilds. The shocks are tunable for attaining the very best dampening rate. Their increased bore size likewise produces more fluid volume for much better performance.
 



CHASSIS MOUNTED SERVO
CMS has become a standard in scale RC and the SCX10T III is created with that requirement in mind. The servo is mounted in the chassis, simply as a full-size Jeep has its steering box located on the frame.
 





 



MULTIPLE TRANSMISSION OPTIONS
Utilizing a 3-channel transmitter and a micro servo, you have control on demand. The SCX10T III set transmission can be set up in one of 2 ways. Set it up for 2-speed using the low and high equipments or set it up for front dig to have a tighter turning radius with the rear axle locked. With a 4-channel transmitter and a 2nd micro servo, it can be set up to utilize both functions.

 




 





Requirements

Approximate Assembly Time: 7-10 Hours

Ball Bearings: Complete set

Batteries: Offered independently

Body: Clear polycarbonate Jeep Wrangler Unlimited with in-depth interior

Brakes: Integral with ESC

Bushing Product: Metal

Charger: Offered independently

Chassis: Adjustable steel C-channel

Conclusion Level: Kit

Differential: Locked

Drivetrain: 4WD

Last Drive Ratio: 45.6:1

Equipment Pitch: 32-Pitch

Ground Clearance: 3 in (76.2mm)

Height: 9.5 in (241mm)

Length: 19.125 in (485mm)

Max Battery Dimensions: 5.47 x 1.85 x 0.98 in (139 x 47 x 25mm)

Motor Size: 540 (sold independently)

Motor Type: Brushed, Brushed (sold independently)

Pinion: 14T

Radio: Offered independently

Scale: 1/10

Servos: Offered independently

Shock Type: Oil-filled coil over spring

Speed Control: Offered independently

Spur Equipment: 40T

Suspension: Multi-link strong axle

Tire Compound: R30

Tire Size: 4.7 in (119mm)

Tire Tread: Nitto Trail Grappler M/T

Track: Front and Rear 8.9" (226mm) distance from outer edges of tires determined side to side

Automobile Type: Crawler, Scale 4WD Crawler

Waterproof: Yes

Weight: 6.5 lbs (2.9kg)

Wheel Size: 1.9 in (48.3mm)

Wheel Hex Size: 12mm

Wheel Type: Injection formed 3-piece beadlock 1.9 KMC Machete

Wheel Width: 1 in (25.5mm)

Wheelbase: 12.3 in (312mm)

Width: 9.25 in (234mm)