Axial 1/10 SCX10 III Jeep JL Wrangler with Portals 4WD Kit

.mediaFeature [padding:2px 0;]
.safeTech [background:#6f92a5; float:left; padding:10px; margin:10px; font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]









Features

Replica V8 engine, transmission housing and transfer case cover and protect the motor while improving scale appearance

Chassis tray accepts full-size, basic LiPo or NiMH batteries, with area on the side rails for running small pack sizes

DIG function transmission setup lets you lock the rear axle from the transmitter for front wheel drive and a tighter turning radius

Two-speed transmission setup choice also available for high and low speeds

Portal axles increase ground clearance and reduce torque twist

Adjustable wheelbase chassis permits each motorist to choose the size of their chassis

Inner fenders and floor sides conceal internal components usually noticeable from the side of the chassis

Licensed KMC Machete 3-piece beadlock wheels offer scale looks and let you eliminate and change tires without gluing

Formally certified Nitto Path Grappler tires in a new taller and broader size boost ground clearance and grip

Completely rebuildable, oil-filled shocks include difficult anodized, threaded shock bodies, coilover springs, and an emulsion-style cap with screw for easier rebuilds

Clear scale Jeep® Wrangler Unlimited body with comprehensive interior





Overview
The 1/10 scale Axial® SCX10T III Jeep® JL Wrangler 4WD package marks the next advance in scale off-road action. While continuing to include crucial components that have made SCX10T lorries successful, the SCX10T III increases chassis realism with information that include a replica V8 engine to house the front-mounted 540 motor. It's mated to a realistic transmission housing and transfer case, like a 1:1 vehicle.
The package's flexible transmission can be integrated in several ways. If you're using a 3-channel radio like the SpektrumT DX3T, you can set it up with a third-channel DIG function that lets you lock the rear axle from the transmitter for front wheel drive and a tighter turning radius. Another 3-channel choice is to set up the lorry with a two-speed transmission to select between high and low speeds. To have access to the two-speed transmission and DIG function concurrently, just add another servo and utilize a radio with a minimum of four channels (such as the 5-channel SpektrumT DX5).
The SCX10T III Jeep® JL Wrangler package uses portal axles to enhance performance by increasing the ground clearance and decreasing torque twist. Its basic battery tray accepts full-size basic LiPo or NiMH packs. There's also area on the side rails for chauffeurs who prefer "shorty" loads. Inner fenders and floor sides conceal internal components that would usually be visible from the side of the chassis.
To top off the chassis, the package features a clear Jeep® Wrangler Unlimited four-door body that's all set for finishing nevertheless you like. Scale information include a roll cage, front hood vents and cowl, windshield wipers, mirrors, door manages and more, plus an in-depth interior. New taller and broader, formally certified Nitto Path Grappler tires on 3-piece licensed KMC Machete beadlock wheels add more scale realism and more grip on dirt, rocks, and all other off-road trails.





Needed to Complete

4-Channel transmitter

4-Channel receiver

Steering servo

ESC (electronic speed controller)

Electric motor

Micro servo for rear dig feature

Micro servo for 2-speed feature

Battery (accepts basic and shorty packs)

Battery charger

AA batteries for transmitter

Paint (for polycarbonate plastic)

What's in the Box?

(1) Axial® SCX10T III Jeep® JL Wrangler 4WD Kit with clear body

(1) Product Handbook





 






SCALE ENGINE DETAIL
Scale functions consisting of a replica V8 engine, transmission housing, and transfer case all cover and protect your electrical motor while adding to the practical appearance.
 



MULTIPLE BATTERY MOUNTING LOCATIONS
The SCX10T III Jeep® JL Wrangler has a standard battery tray that accepts full-size basic LiPo or NiMH packs. There's area on the side rails, too, for chauffeurs who prefer smaller sized size packs or need extra power for other accessories.
 







DIG TRANSMISSION WITH TWO-SPEED OPTION
Using 3-channel control, the package's transmission can be established one of 2 ways: with high and low speeds or with a DIG function that locks the rear axle from the transmitter on command, for the tighter turning radius of front wheel drive. With another servo and 4-channel control, both choices can be offered concurrently.
 



PORTAL OFFSET AXLE HOUSING WITH HYPOID RING AND PINION GEAR
Website Axles like those found in some full-size off-roaders offer greater ground clearance and reduce the torque on other drivetrain components for better performance.
 







ADJUSTABLE WHEELBASE CHASSIS
The SCX10T III Jeep® JL Wrangler package wheelbase is adjustable with optional links, enabling you to choose the wheelbase of your choice.
 



OPTIMIZED SUSPENSION GEOMETRY
The suspension geometry is based upon the SCX10T II but refined slightly for the new chassis design. The front suspension has been enhanced to reduce bump steer, while the rear 4-link reduces torque twist.
 







CLEAR JEEP WRANGLER UNLIMITED 4-DOOR BODY
The clear scale Jeep® Wrangler Unlimited body mirrors its full-size counterpart with an in-depth interior for "very scale" looks. The interior has a molded roll cage, guiding wheel, and motorist head. There are lots of formed scale information on the body, too: front radiator/light pails; front hood vents; front cowl; windshield wipers; mirrors; door manages; and fuel door.
 



INNER FENDERS AND FLOOR SIDES
The SCX10T III Jeep® JL Wrangler package body's inner fenders and floor sides conceal internal components that would usually be visible from the side of the chassis. The sealed receiver box can be removed to provide you more area for the electronics of your choice. An additional tree of body posts is included, enabling you to customize your rig with any 12.3" wheel based bodies.
 







NITTO TRAIL GRAPPLER TIRES
The S30 substance Nitto Path Grappler tires included with the SCX10T III Jeep® JL Wrangler package are taller and broader (4.74 x 1.7), providing more ground clearance and more grip in the variety of surface that you will discover while you're off-roading.
 



LICENSED 3-PIECE BEADLOCK WHEELS
Legendary in the off-road world, these formally certified KMC XD Machete wheels are formed in satin chrome and include stunning scale information. Since they're 3-piece beadlock wheels, tires can be installed, removed and changed easily without gluing.
 







ALUMINUM ADJUSTABLE COILOVER SHOCKS
The oil-filled shocks have clear anodized, threaded bodies, a single coilover spring, plus an emulsion-style cap with screw for easier rebuilds. The shocks are tunable for achieving the best dampening rate. Their increased bore size also creates more fluid volume for much better performance.
 



CHASSIS MOUNTED SERVO
CMS has ended up being a standard in scale RC and the SCX10T III is developed with that requirement in mind. The servo is installed in the chassis, just as a full-size Jeep has its steering box located on the frame.
 





 



MULTIPLE TRANSMISSION OPTIONS
Using a 3-channel transmitter and a micro servo, you have control as needed. The SCX10T III package transmission can be configured in one of 2 ways. Set it up for 2-speed using the high and low equipments or set it up for front dig to have a tighter turning radius with the rear axle locked. With a 4-channel transmitter and a second micro servo, it can be configured to utilize both functions.

 




 





Specs

Approximate Assembly Time: 7-10 Hours

Ball Bearings: Complete set

Batteries: Sold separately

Body: Clear polycarbonate Jeep Wrangler Unlimited with comprehensive interior

Brakes: Integral with ESC

Bushing Product: Metal

Battery charger: Sold separately

Chassis: Adjustable steel C-channel

Completion Level: Kit

Differential: Locked

Drivetrain: 4WD

Last Drive Ratio: 45.6:1

Gear Pitch: 32-Pitch

Ground Clearance: 3 in (76.2mm)

Height: 9.5 in (241mm)

Length: 19.125 in (485mm)

Max Battery Dimensions: 5.47 x 1.85 x 0.98 in (139 x 47 x 25mm)

Motor Size: 540 (sold separately)

Motor Type: Brushed, Brushed (sold separately)

Pinion: 14T

Radio: Sold separately

Scale: 1/10

Servos: Sold separately

Shock Type: Oil-filled coil over spring

Speed Control: Sold separately

Spur Gear: 40T

Suspension: Multi-link strong axle

Tire Substance: R30

Tire Size: 4.7 in (119mm)

Tire Tread: Nitto Path Grappler M/T

Track: Front and Rear 8.9" (226mm) range from outer edges of tires measured side to side

Automobile Type: Spider, Scale 4WD Spider

Water-Resistant: Yes

Weight: 6.5 pounds (2.9kg)

Wheel Size: 1.9 in (48.3mm)

Wheel Hex Size: 12mm

Wheel Type: Injection formed 3-piece beadlock 1.9 KMC Machete

Wheel Width: 1 in (25.5mm)

Wheelbase: 12.3 in (312mm)

Width: 9.25 in (234mm)