Associated RC8B3.1e Team Kit

**Additional Technical Info Will Be Added When It Appears.**
This is the Team Associated Radio Controlled, Electric Powered, 1/8 scale
RC8B3.1e Team Buggy Kit.

New includes that vary from the RC8Be include;
**H.T.C. (High Torque Capacity) differentials**
**Revised Suspension Arm Rotates for more ground clearance**
**Anti-roll linkage curves changed for more chassis assistance**
**New shock springs**
**Pro-Line Predator Body**

FEATURES:
Chassis: Difficult anodized 7075 aluminum
Drive: 4 wheel, CVA shafts
Gearboxes: Bevel equipment type with 3.38:1 ratio, and quick access
    differentials
Shocks: 7075-T6 aluminum 16mm Big Bore with TiN covered 3.5mm shafts
    bigger size accuracy springs and optimized bladders for more
    precise volume settlement
Shock Towers: 7075-T6 aluminum
Suspension: Front has pillow ball uprights for increased
    adjustability and toughness, refined suspension geometry with
    lower hinge pin inserts for simple roll center changes
Motor Mount: Two-piece moving design for simple motor removal and equipment
    mesh adjustment
Body: ProLine Predator
Caster: Adjustable, caster/toe-in refers to the angle of the front
    suspension when viewed from the side of the automobile in relation to the
    chassis
Camber: Adjustable, camber refers to the angle of the tops of the
    tires from vertical when viewed from front or behind lorry

INCLUDES:
RC8B3.1 Team Buggy Kit with Shocks, Body, Wing, Instruction Manual

REQUIRES:
Radio: 2-channel with high-torque steering servo
Motor & ESC: Brushless type for 1/8 scale buggies
Battery: 4S LiPo
Battery Battery charger: To match selected battery
Wheels and Tires: 1/8 scale buggy
LiPo charging bag, glue, tools
Polycarbonate safe spray or brush-on paint

SPECS:
Lorry;
Length: 19.21" (488mm)
Width and weight differ with engine, exhaust, wheels and tires utilized in
    the finished package
Wheelbase: 12.9" (327.5mm)
Tray Dimensions: 5.7 x 2 x 0.79" (145 x 51 x 20mm)
    Body;
Length:
Width:
Height:

REMARKS:
For Replacement Ball Bearings use:
Qty. Size Location Qty. Stock Number
2 8x16x5mm Fr Diff 1 DTXC1585
2 8x16x5mm Ctr. Diff 1 DTXC1585
2 8x16x5mm Rear Diff 1 DTXC1585
4 6x10x3mm Steering 2 DTXC1561
4 5x8x2.5mm Steering 2 DTXC1523
2 6x12x4mm Fr Gearbox 1 DTXC1569
2 6x12x4mm Fr Gearbox 1 DTXC1569
4 8x16x5mm Flanged Fr Uprights 1 ASCC1565
4 8x16x5mm Flanged R Uprights 1 ASCC1565