Associated Hood Pins Large (6)

These are ASSOCIATED big standard type body pins utilized to hold body to mount.

INCLUDES:
6 pins.

SPECS:
length 1-3/8"
wire diameter 1/16"

Lots of others have actually bought this product together with the product that you are currently checking out.



This is the replacement Front or Back Transmission Case (transmission)
for the Associated Monster GT RTR
This part mounts on the front or back of the chassis and houses the
differential equipment and differential pinion.

FEATURES:
Two piece, black plastic building

CONSISTS OF:
Two transmission halves
One plastic transmission collar
One 3x18mm phillips head screw
One 3x34mm phillips head screw
Three 3x25mm phillips head screw
4 3mm nylon insert lock nuts

REQUIRES:
Assembly following the guidelines that featured the model

COMMENTS:
This plan consists of parts for one transmission case. If both the
    front and rear case is required, order two of this number.

Below is a excellent product that numerous others have actually purchased the exact same time.



This is a set of Bellcrank Hardware for the Team Associated
Monster GT RTR

FEATURES:
Metal building

CONSISTS OF:
4 metal ball eyelets
4 3x16mm phillips head screws
Two 3mm hex head shoulder screws
4 3mm metal lock nuts with nylon inserts

REQUIRES:
Assembly onto the model following the manual that featured the kit

COMMENTS:
To get the rest of the parts required for a total bellcrank, order
ASCC8625 for the plastic parts and ASCC8626 for the metal posts.

You will enjoy this item if you have the item earlier discussed.



This is the Rear Shock Rod End for the Team Associated GT vehicles.

FEATURES:
Black nylon building ball ends
Steel swivel balls

CONSISTS OF:
Two ball ends
Two steel swivel balls

REQUIRES:
Setup

This product praises the above reviewed product.



This is the Replacement Shock Rebuild Kit w/ Shock Shafts
for the Team Associated Monster GT. This Rebuilds Two Shocks.

FEATURES:
Shock Shafts-
    Steel Building and construction
    Polished Silver in Color
    Standard Threading on Bottom
    Dual E-Clip Cut-Outs on Leading
Diaphragms-
    Rubber Building and construction
    Black in Color
O-Rings-
    Silicone Building and construction
    Blue in Color
Shock Body Bushing-
    Nylon Building and construction
    White in Color
E-Clips-
    Black in Color

CONSISTS OF:
Two Steel Silver Shock Shafts
Two Black Rubber Shock Diaphragms
4 Blue Silicone O-Rings
Two White Nylon Shock Base Bushings
Two 3/32" Black Metal E-Clips

REQUIRES:
Assembly onto Vehicle.

SPECS:
SHOCK SHAFT-
Length: 2.19" (55.62mm)
Diameter: 0.11" (02.79mm)
Thread Length: 0.27" (06.85mm)

SHOCK DIAPHRAGMS-
Diameter: 0.56" (14.22mm)
Density: 0.03" (00.76mm)

RUBBER O-RINGS-
Inner Diameter: 0.14" (03.55mm)
Outer Diameter: 0.26" (06.60mm)
Density: 0.05" (01.27mm)

E-CLIPS-
Outer Diameter: 0.23" (05.84mm)
Inner Diameter: 0.09" (02.28mm)
Density: 0.01" (00.25mm)

This product praises the above reviewed product.

Flat Head Hex Screw M3x8mm (10)

This is a package of 3x8mm Associated Flat Head Hex Device Screws.
    These screws can be utilized anywhere this size is needed.

FEATURES:
Black steel building
Hexagon socket drive insert

CONSISTS OF:
Twenty 3x8mm flat head maker screws

REQUIRES:
2.5mm allen secret, GPMR8012