Associated Flat Head Hex Screw M3x8mm (10)

This is a plan of 3x8mm Associated Flat Head Hex Device Screws.
    These screws can be utilized anywhere this size is needed.

FEATURES:
Black steel building and construction
Hexagon socket drive insert

CONSISTS OF:
Twenty 3x8mm flat head machine screws

REQUIRES:
2.5mm allen secret, GPMR8012

This product compliments the above reviewed product.



This is the replacement Front or Back Transmission Case (gearbox)
for the Associated Monster GT RTR
This part mounts on the front or back of the chassis and houses the
differential gear and differential pinion.

FEATURES:
Two piece, black plastic building and construction

CONSISTS OF:
Two gearbox halves
One plastic gearbox collar
One 3x18mm phillips head screw
One 3x34mm phillips head screw
Three 3x25mm phillips head screw
Four 3mm nylon insert lock nuts

REQUIRES:
Assembly following the instructions that included the model

REMARKS:
This bundle includes parts for one transmission case. If both the
    front and rear case is required, order two of this number.

The listed below product likewise pairs actually well with the product being reviewed.



This is a set of Bellcrank Hardware for the Group Associated
Monster GT RTR

FEATURES:
Metal building and construction

CONSISTS OF:
Four metal ball eyelets
Four 3x16mm phillips head screws
Two 3mm hex head shoulder screws
Four 3mm metal lock nuts with nylon inserts

REQUIRES:
Assembly onto the model following the handbook that included the kit

REMARKS:
To get the rest of the parts required for a total bellcrank, order
ASCC8625 for the plastic parts and ASCC8626 for the metal posts.

This is a superb addition to the product currently being reviewed.



This is the Rear Shock Rod End for the Group Associated GT vehicles.

FEATURES:
Black nylon building and construction ball ends
Steel swivel balls

CONSISTS OF:
Two ball ends
Two steel swivel balls

REQUIRES:
Installation

Get this product to improve the one you are reading around.



This is the Replacement Shock Rebuild Package w/ Shock Shafts
for the Group Associated Monster GT. This Restores Two Shocks.

FEATURES:
Shock Shafts-
    Steel Building and construction
    Refined Silver in Color
    Standard Threading on Bottom
    Double E-Clip Cut-Outs on Top
Diaphragms-
    Rubber Building and construction
    Black in Color
O-Rings-
    Silicone Building and construction
    Blue in Color
Shock Body Bushing-
    Nylon Building and construction
    White in Color
E-Clips-
    Black in Color

CONSISTS OF:
Two Steel Silver Shock Shafts
Two Black Rubber Shock Diaphragms
Four Blue Silicone O-Rings
Two White Nylon Shock Base Bushings
Two 3/32" Black Metal E-Clips

REQUIRES:
Assembly onto Vehicle.

SPECS:
SHOCK SHAFT-
Length: 2.19" (55.62mm)
Size: 0.11" (02.79mm)
Thread Length: 0.27" (06.85mm)

SHOCK DIAPHRAGMS-
Size: 0.56" (14.22mm)
Density: 0.03" (00.76mm)

RUBBER O-RINGS-
Inner Size: 0.14" (03.55mm)
Outer Size: 0.26" (06.60mm)
Density: 0.05" (01.27mm)

E-CLIPS-
Outer Size: 0.23" (05.84mm)
Inner Size: 0.09" (02.28mm)
Density: 0.01" (00.25mm)