Associated Flat Head Hex Screw M3x8mm (10)

This is a bundle of 3x8mm Associated Flat Head Hex Machine Screws.
    These screws can be utilized anywhere this size is needed.

FEATURES:
Black steel construction
Hexagon socket drive insert

CONSISTS OF:
Twenty 3x8mm flat head machine screws

REQUIRES:
2.5mm allen key, GPMR8012

This product praises the above gone over product.



This is the replacement Front or Back Transmission Case (gearbox)
for the Associated Monster GT RTR
This part installs on the front or rear of the chassis and houses the
differential gear and differential pinion.

FEATURES:
2 piece, black plastic construction

CONSISTS OF:
2 gearbox halves
One plastic gearbox collar
One 3x18mm phillips head screw
One 3x34mm phillips head screw
Three 3x25mm phillips head screw
Four 3mm nylon insert lock nuts

REQUIRES:
Assembly following the guidelines that featured the design

COMMENTS:
This package contains parts for one transmission case. If both the
    front and rear case is needed, order 2 of this number.

The below product also sets truly well with the product being gone over.



This is a set of Bellcrank Hardware for the Group Associated
Monster GT RTR

FEATURES:
Metal construction

CONSISTS OF:
Four metal ball eyelets
Four 3x16mm phillips head screws
2 3mm hex head shoulder screws
Four 3mm metal lock nuts with nylon inserts

REQUIRES:
Assembly onto the design following the handbook that featured the package

COMMENTS:
To get the rest of the parts required for a complete bellcrank, order
ASCC8625 for the plastic parts and ASCC8626 for the metal posts.

This is a superb addition to the product currently being gone over.



This is the Rear Shock Rod End for the Group Associated GT vehicles.

FEATURES:
Black nylon construction ball ends
Steel swivel balls

CONSISTS OF:
2 ball ends
2 steel swivel balls

REQUIRES:
Setup

Get this product to improve the one you are reading about.



This is the Replacement Shock Rebuild Package w/ Shock Shafts
for the Group Associated Monster GT. This Restores 2 Shocks.

FEATURES:
Shock Shafts-
    Steel Building
    Refined Silver in Color
    Requirement Threading on Bottom
    Dual E-Clip Cut-Outs on Top
Diaphragms-
    Rubber Building
    Black in Color
O-Rings-
    Silicone Building
    Blue in Color
Shock Body Bushing-
    Nylon Building
    White in Color
E-Clips-
    Black in Color

CONSISTS OF:
2 Steel Silver Shock Shafts
2 Black Rubber Shock Diaphragms
Four Blue Silicone O-Rings
2 White Nylon Shock Base Bushings
2 3/32" Black Metal E-Clips

REQUIRES:
Assembly onto Vehicle.

SPECS:
SHOCK SHAFT-
Length: 2.19" (55.62mm)
Size: 0.11" (02.79mm)
Thread Length: 0.27" (06.85mm)

SHOCK DIAPHRAGMS-
Size: 0.56" (14.22mm)
Density: 0.03" (00.76mm)

RUBBER O-RINGS-
Inner Size: 0.14" (03.55mm)
Outer Size: 0.26" (06.60mm)
Density: 0.05" (01.27mm)

E-CLIPS-
Outer Size: 0.23" (05.84mm)
Inner Size: 0.09" (02.28mm)
Density: 0.01" (00.25mm)