Associated Flat Head Hex Screw M3x8mm (10)

This is a plan of 3x8mm Associated Flat Head Hex Device Screws.
    These screws can be used anywhere this size is needed.

FEATURES:
Black steel building
Hexagon socket drive insert

INCLUDES:
Twenty 3x8mm flat head machine screws

NEEDS:
2.5mm allen key, GPMR8012

This thing compliments the above discussed thing.



This is the replacement Front or Rear Transmission Case (gearbox)
for the Associated Beast GT RTR
This part mounts on the front or back of the chassis and houses the
differential gear and differential pinion.

FEATURES:
2 piece, black plastic building

INCLUDES:
2 gearbox halves
One plastic gearbox collar
One 3x18mm phillips head screw
One 3x34mm phillips head screw
3 3x25mm phillips head screw
Four 3mm nylon insert lock nuts

NEEDS:
Assembly following the directions that had the model

COMMENTS:
This package includes parts for one transmission case. If both the
    front and rear case is required, order 2 of this number.

The below thing likewise pairs actually well with the thing being discussed.



This is a set of Bellcrank Hardware for the Team Associated
Beast GT RTR

FUNCTIONS:
Metal building

INCLUDES:
Four metal ball eyelets
Four 3x16mm phillips head screws
2 3mm hex head shoulder screws
Four 3mm metal lock nuts with nylon inserts

NEEDS:
Assembly onto the model following the handbook that had the set

COMMENTS:
To get the rest of the parts required for a complete bellcrank, order
ASCC8625 for the plastic parts and ASCC8626 for the metal posts.

This is a wonderful addition to the thing currently being discussed.



This is the Rear Shock Rod End for the Team Associated GT vehicles.

FEATURES:
Black nylon building ball ends
Steel swivel balls

INCLUDES:
2 ball ends
2 steel swivel balls

NEEDS:
Installation

Get this thing to improve the one you are reading about.



This is the Replacement Shock Rebuild Package w/ Shock Shafts
for the Team Associated Beast GT. This Reconstructs 2 Shocks.

FEATURES:
Shock Shafts-
    Steel Construction
    Sleek Silver in Color
    Requirement Threading on Bottom
    Double E-Clip Cut-Outs on Leading
Diaphragms-
    Rubber Construction
    Black in Color
O-Rings-
    Silicone Construction
    Blue in Color
Shock Body Bushing-
    Nylon Construction
    White in Color
E-Clips-
    Black in Color

INCLUDES:
2 Steel Silver Shock Shafts
2 Black Rubber Shock Diaphragms
Four Blue Silicone O-Rings
2 White Nylon Shock Base Bushings
2 3/32" Black Metal E-Clips

NEEDS:
Assembly onto Vehicle.

SPECS:
SHOCK SHAFT-
Length: 2.19" (55.62mm)
Size: 0.11" (02.79mm)
Thread Length: 0.27" (06.85mm)

SHOCK DIAPHRAGMS-
Size: 0.56" (14.22mm)
Thickness: 0.03" (00.76mm)

RUBBER O-RINGS-
Inner Size: 0.14" (03.55mm)
Outer Size: 0.26" (06.60mm)
Thickness: 0.05" (01.27mm)

E-CLIPS-
Outer Size: 0.23" (05.84mm)
Inner Size: 0.09" (02.28mm)
Thickness: 0.01" (00.25mm)