Associated Flat Head Hex Screw M3x8mm (10)

This is a package of 3x8mm Associated Flat Head Hex Device Screws.
    These screws can be utilized anywhere this size is needed.

FEATURES:
Black steel building
Hexagon socket drive insert

INCLUDES:
Twenty 3x8mm flat head device screws

NEEDS:
2.5mm allen secret, GPMR8012

This item compliments the above discussed item.



This is the replacement Front or Rear Transmission Case (gearbox)
for the Associated Beast GT RTR
This part mounts on the front or back of the chassis and houses the
differential gear and differential pinion.

FEATURES:
Two piece, black plastic building

INCLUDES:
Two gearbox halves
One plastic gearbox collar
One 3x18mm phillips head screw
One 3x34mm phillips head screw
Three 3x25mm phillips head screw
Four 3mm nylon insert lock nuts

NEEDS:
Assembly following the instructions that included the design

REMARKS:
This package includes parts for one transmission case. If both the
    front and rear case is required, order 2 of this number.

The below item likewise pairs truly well with the item being discussed.



This is a set of Bellcrank Hardware for the Team Associated
Beast GT RTR

FUNCTIONS:
Metal building

INCLUDES:
Four metal ball eyelets
Four 3x16mm phillips head screws
Two 3mm hex head shoulder screws
Four 3mm metal lock nuts with nylon inserts

NEEDS:
Assembly onto the design following the handbook that included the package

REMARKS:
To obtain the rest of the parts required for a total bellcrank, order
ASCC8625 for the plastic parts and ASCC8626 for the metal posts.

This is a great enhancement to the item presently being discussed.



This is the Rear Shock Rod End for the Team Associated GT vehicles.

FEATURES:
Black nylon building ball ends
Steel swivel balls

INCLUDES:
Two ball ends
Two steel swivel balls

NEEDS:
Setup

Get this item to enhance the one you read around.



This is the Replacement Shock Rebuild Package w/ Shock Shafts
for the Team Associated Beast GT. This Restores Two Shocks.

FEATURES:
Shock Shafts-
    Steel Building
    Polished Silver in Color
    Requirement Threading on Bottom
    Double E-Clip Cut-Outs on Leading
Diaphragms-
    Rubber Building
    Black in Color
O-Rings-
    Silicone Building
    Blue in Color
Shock Body Bushing-
    Nylon Building
    White in Color
E-Clips-
    Black in Color

INCLUDES:
Two Steel Silver Shock Shafts
Two Black Rubber Shock Diaphragms
Four Blue Silicone O-Rings
Two White Nylon Shock Base Bushings
Two 3/32" Black Metal E-Clips

NEEDS:
Assembly onto Vehicle.

SPECS:
SHOCK SHAFT-
Length: 2.19" (55.62mm)
Size: 0.11" (02.79mm)
Thread Length: 0.27" (06.85mm)

SHOCK DIAPHRAGMS-
Size: 0.56" (14.22mm)
Thickness: 0.03" (00.76mm)

RUBBER O-RINGS-
Inner Size: 0.14" (03.55mm)
Outer Size: 0.26" (06.60mm)
Thickness: 0.05" (01.27mm)

E-CLIPS-
Outer Size: 0.23" (05.84mm)
Inner Size: 0.09" (02.28mm)
Thickness: 0.01" (00.25mm)