ARRMA 1/8 TYPHON 4X4 V3 3S BLX Brushless Buggy RTR, Red

.mediaFeature [padding:2px 0;]
.safeTech [background:#6f92a5;float:left;padding:20px 0;font-size: 17]
.safeTech, .safeTech h4 [color:#fff;]

.aligncenter [
text-align: center;
]



Features

Stronger chassis and maintained hinge pin plates

Guiding with more clearance for stones

Castellated slipper pad and moving equipment mesh

Plastic locknut for slipper

23T Spline servo saver

37T 1.35Mod diffs with silicone O-rings

Power Module with moving equipment mesh and enhanced dirt management

Rubber protected bearings throughout
Oil-filled shocks with silicone O-rings

Tough gunmetal colored multi-spoke wheels

Vented multi-terrain dBoots® 2-HO™ tires

BLX100 2S/3S water resistant* ESC

*For details on water resistant standards, describe the guideline manual.

IC5™ adapters (EC5™) compatible

Signature easy-access modular design

Easy-access power module

Easy-access electronic devices module

Easy-access diff module elimination front and rear

Double wishbone suspension front and rear

Metal-geared differentials

Adjustable trip height

Adjustable body installs

Adjustable turnbuckles

High-speed center driveshaft support

High downforce wing

2-year limited guarantee (see site for details)

50+ Miles Per Hour (80+ km/h) speed possible in optimum driving conditions on THREE LiPo





Overview
Making your move into brushless 1/8 scale Speed Buggy action has never been simpler. Quick, rugged and factory-built, the THREE LiPo-compatible ARRMA® TYPHON™ 4X4 THREE BLX RTR comes prepared out of the box to bash on any terrain. Accuracy aluminum, difficult steel and composite materials come together for an easy-to-maintain, super-durable vehicle design whose high downforce wing and low center of gravity, with wide arms and narrow wheels and tires, enhance dealing with over race tracks, trails, muddy courses, skate parks and more. This version features new equipment that even more increases the initial buggy’s currently remarkable performance and durability.

The TYPHON™ 4X4 THREE BLX RTR is DEVELOPED QUICKLY, DEVELOPED DIFFICULT — built for interesting bashing speeds and extreme, all-terrain toughness. New features that improve its unstoppable performance consist of a more powerful chassis and maintained hinge pin plates; guiding with more clearance for stones; a castellated slipper pad and moving equipment mesh; and rubber-shielded bearings throughout.

It likewise now consists of a Spektrum™ SLT3™ transmitter and SLR300 receiver. The transmitter is ergonomically created for long periods of fatigue-free bashing and has a foam wheel for exact fingertip control plus an enhanced hand grip and trigger feel. New bashers will have the ability to set throttle limits at 50% or 75% till they are prepared to utilize the complete speed capacity. The SLT3™ is compatible with Strategy® SLT™ receivers to run other RTR automobiles you may own, and consists of a third channel to control optional features such as lights and winches on models that have them.

ARRMA® now powers the TYPHON 4X4 THREE BLX with a brushless system including its BLX100 ESC and the Spektrum™ Firma™ 3200Kv brushless motor. The combination offers incredible torque, acceleration and speed. The transmission and chassis are ruggedly engineered to make the most of the electronic devices’ power — in ARRMA custom, DEVELOPED QUICKLY, DEVELOPED TOUGH.

It has the innovative modular design perfected by ARRMA® engineers for simple component access and upkeep. The power module, with enhanced dirt management, includes the motor with ARRMA® heatsink and cooling fan, plus motor plate, slipper clutch assembly and equipment cover. The power module can be detached from the chassis as a complete unit by removing simply one screw. With the power module eliminated, the slipper clutch can be reached quickly for changes by taking out three screws that connect the equipment cover. The equipment ratio can be carefully tuned as the power module now uses a sliding motor mesh design.

A two-piece molding screwed to the Speed Buggy’s chassis works as its electronic devices module, consisting of a water resistant receiver box, servo install and ESC tray. The SLR300 receiver installs inside the receiver box for security from dirt and moisture. The ultra-compact ESC is screwed to the top of the module, enabling fast access to the on/off switch, while the servo installs to the side. All three components can be gotten rid of together, quickly and easily.

The differential module houses each differential unit in an ingenious yoke design. Just 8 screws require to be gotten rid of to release the front and rear yokes. The power module can then be detached, enabling you to pivot the transmission cases for differential access. The TYPHON™ 4X4 THREE BLX RTR comes brushless-ready with 37T 1.35mod diffs with silicone O-rings. The large equipments can endure big torque, and internal metal equipments have actually been picked for reliability during extreme bashing.

Its full-time 4WD transmission uses strong front, back, and centerline telescopic driveshafts that can’t be lost during heavy impacts, unlike dogbones. An easy, dependable, responsive guiding assembly complements the ultra-reliable drive system and features a servo horn with built-in servo saver. The TYPHON™ 4X4 THREE BLX RTR consists of the water resistant Spektrum™ SPMS651 metal-geared digital servo for 15% more torque than the previous version’s ADS-7M servo.

The self-bleeding, oil-filled shocks, now with silicone O-rings, utilize a tried and evaluated, coil-over design for basic upkeep and incredible handling. Their innovative rod-end has a molded-in spring perch for extra strength. High chassis sides and a close-fitting buggy body limit the amount of dirt and debris that can enter into the chassis tub. Front and rear bumpers use defense against impacts.

Tough gunmetal colored, multi-spoke wheels with vented dBoots® 2-HO™ tires offer the 1/8 scale TYPHON™ 4X4 THREE BLX RTR Speed Buggy reliable traction for bashing on practically any terrain. With the metallic-finish body and forged composite detail, it likewise looks as excellent as it performs. A stylish, high-downforce wing keeps all four wheels planted as you explore the upper limits of its outrageous speed range.





Needed to Complete

TWO LiPo or THREE Hardcase LiPo Battery

Compatible Battery charger

LiPo Safe Charging Bag

(4) AA Batteries

What's in package?

(1) ARRMA® TYPHON™ 4X4 THREE BLX 1/8 Scale 4WD Electric Speed Buggy RTR

(1) BLX100 2S/3S Water Resistant* ESC

(1) Spektrum™ Firma™ 3660 3200Kv Brushless Motor

(1) Spektrum™ 2.4GHz SLT3™ 3-Channel Transmitter

(1) Spektrum™ SLR300 Receiver

(1) Spektrum™ SPMS651 Water Resistant* Metal-Geared Digital Servo

(1) Item Handbook

*For details on water resistant standards, describe the user's manual.









Spektrum™ 3-Channel SLT3™ 2.4GHz radio and SLR300 Waterproof* Receiver
Quick reaction SLT™ protocol

Foam wheel

Improved grip and trigger feel

Improved wheel and trigger force

2-way thumb switch third channel

50% and 75% Throttle mode (for novices)

Strategy® SLT™ receiver compatible

 



Spektrum™ SPMS651 Metal-Geared Digital Servo

101 oz-in (7.27 kg-cm) @ 6V

15% more torque than the previous ADS-7M servo for enhanced steering feel

Waterproof*

*For details on water resistant standards, describe the user's manual.

 







Spektrum™ Firma™ 3660 3200Kv brushless motor with Safe D pinion and ARRMA® heatsink and cooling fan
 



Strengthened Chassis
Stronger chassis and maintained hinge pin plates
 







Larger pull tab on power module

 



Castellated slipper pad and sliding gear mesh
 







Rubber shielded bearings

 



Redesigned Steering
Steering with more clearance for stones.
 







Tougher brushless ready transmission
Metal input spline moulded into composite equipment. Same equipments as the ARRMA FOUR.
 



Sealed Wheels & Vented Tires
Stops dirt getting in and enables water to get away.
 







dBoots® 2-HO™ tires
Tough gunmetal colored, multi-spoke wheels with vented dBoots® 2-HO™ tires offer the 1/8 scale TYPHON™ 4X4 THREE BLX RTR Speed Buggy reliable traction for bashing on practically any terrain.
 



Silicone O-rings
Oil-filled shocks with silicone O-rings
 






Heavy Duty Bumpers

 



Proven Power Package
Amazing power and performance.
 







Easy-access power module
Detaches from chassis as a complete unit by removing one screw.
Contains motor, motor plate, slipper clutch assembly and equipment cover.

 



Easy-access electronics module
Two-piece molding screwed to the chassis includes a water resistant receiver box, servo install, and ESC tray.
Receiver installs inside sealed module for security from dirt and moisture.
ESC screws to the top for simple upkeep and switch access.
Servo installs on the side for fast maintenance.

 







Metal-geared differentials
Big equipments can endure big torque, and internal metal equipments have actually been picked for reliability during extreme bashing.
Easy-access front and rear diff module elimination.

 



Proven tough composite shock towers