ARRMA BLX85 Brushless ESC

This is the Arrma BLX85 Brushless ESC.

FEATURES:
Gold plated bullet ports for ultimate power conductivity
Heatsink helps to dissipate heat throughout extreme operation
Durable case with hold down tabs for secure fitting in chassis
Water resistant switch
LiPo and NiMH cutoff to protect batteries
6V BEC
Forward, brake, and reverse throttle modes
T-connector for battery

CONSISTS OF:
Arrma BLX85 Brushless ESC with all Connectors

SPECS:
Continuous Current Capacity: 60A
Compatible Batteries: 6 - 7 Cell NiMH (7.2 to 8.4V), 2 - 3S LiPo
    (7.4 - 11.1V)
Low Voltage Cutoff: 3.3V per cell
Thermal Security Temperature 221°F (105°C)
Over-Voltage Security: Over 3S LiPo (11.1V)
Brushless Motor Limitation: 5000Kv
Suggested Battery Spec:
    4000mAh - 25C minimum 2S or 3S battery pack
BEC Voltage: 6V
BEC Current: 3A
Burst Current: 420A
Length: 1.69" (43mm)
Height 1.18" (30mm)
Width: 2.15" (54.5mm)
Weight 3.49oz (99g)
Receiver Wire Length 6.69" (170mm)
Battery Wire Length 5.91" (150mm)
Motor Wire Length: 6.3" (160mm) including port
Switch Length: 0.83" (21mm)
Switch Width: 0.52" (13.3mm)
Switch Height: 0.63" (16mm)
Bullet Connector Size 0.16" (4mm)
Wire Size: 12AWG
Battery Connector: T-connector