ARRMA BLX85 Brushless ESC

This is the Arrma BLX85 Brushless ESC.

FEATURES:
Gold plated bullet connectors for supreme power conductivity
Heatsink assists to dissipate heat throughout severe operation
Long lasting case with hold down tabs for safe fitting in chassis
Waterproof switch
LiPo and NiMH cutoff to protect batteries
6V BEC
Forward, brake, and reverse throttle modes
T-connector for battery

INCLUDES:
Arrma BLX85 Brushless ESC with all Connectors

SPECS:
Constant Present Capacity: 60A
Suitable Batteries: 6 - 7 Cell NiMH (7.2 to 8.4V), 2 - 3S LiPo
    (7.4 - 11.1V)
Low Voltage Cutoff: 3.3V per cell
Thermal Defense Temperature 221°F (105°C)
Over-Voltage Defense: Over 3S LiPo (11.1V)
Brushless Motor Limit: 5000Kv
Suggested Battery Spec:
    4000mAh - 25C minimum TWO or 3S battery pack
BEC Voltage: 6V
BEC Current: 3A
Burst Current: 420A
Length: 1.69" (43mm)
Height 1.18" (30mm)
Width: 2.15" (54.5mm)
Weight 3.49oz (99g)
Receiver Wire Length 6.69" (170mm)
Battery Wire Length 5.91" (150mm)
Motor Wire Length: 6.3" (160mm) consisting of port
Switch Length: 0.83" (21mm)
Switch Width: 0.52" (13.3mm)
Switch Height: 0.63" (16mm)
Bullet Connector Size 0.16" (4mm)
Wire Size: 12AWG
Battery Connector: T-connector