ARRMA BLX185 6S ESC

This is the Arrma BLX185 6S 150A Electronic Speed Control.

FEATURES:
Can be powered by two 3-6S (11.1-22.2V) LiPo batteries, 35C 5000mAh
    minimum requirement
6.0V/3A continuous output, 12A max
Bridge adapter for using single 4S or SIX battery
Over voltage and overheat security
Two stage LiPo cutoff, single stage NiMH cutoff
Temperature security mode if ESC temperature surpasses 221°F
    (105°C)
Integrated cooling fan to minimize heat throughout extreme running
Water resistant under regular use
Integrated hold down tabs quickly secure inside vehicle chassis
Establish for usage from factory, settings might be altered

INCLUDES:
BLX185 SIX ESC with Cooling Fan, two Accumulate XT90 Battery Connectors
    with 10AWG Wires, Receiver Plug, Power Change and Set Button
    10AWG Motor Wires with 4mm Size Gold Plated Female Connectors,
    Guidelines and Bridge Connector

REQUIRES:
Motor such as the Arrma BLX 2050Kv 6S Brushless Motor, ARAG2000

SPECS:
Length: 2.26" (57.5mm)
Width: 2.34" (59.5mm) including hold down tabs
Height: 1.53" (38.9mm)
Weight: 6.9oz (196g)
Change Length: 1.15" (29.3mm)
Change Width: 0.5" (12.8mm)
Change Height: 0.71" (18mm)
Receiver Wire Length: 7.87" (200mm)
Battery Wire Length: 6.5" (165mm)
Motor Wire Length: 5.12" (130mm) including adapter
Motor Limit: 3000kV
Wire Size: 10AWG
Motor Connectors: Gold bullet
Battery Connectors: Two Accumulate XT90
BEC Voltage: 6.0V
BEC Current Minimum Continuous: 3A
BEC Current Max Burst: 12A
Low Voltage Cutoff: 3.2V
Over Voltage Protection: Over SIX LiPo (22.2V)
Continouous Amp Score: 150A
Throttle Mode: FWD/BRAKE/REV
Throttle Setup: Handbook via pushbutton
User Programmable: Yes, via button only
Battery Mode: LiPo/NiMH, default LiPo mode