ARRMA HD 57T Spur Gear 0.8Mod

This HD 57T Spur Gear is produced from high-quality, resilient composite product for constant performance.

Features

Accuracy produced equipment tooth configuration - Difficult composite product for lasting toughness and smooth equipment mesh – 57 teeth, 0.8 module

Consists of

1 x HD 57T Spur Gear

Often gotten with the item that you are currently reviewing.

15T 0.8Mod Safe-D5 Pinion Gear

Want one more great item to match the above discussed item?

Aluminum Motor Mount Set

This high-quality Aluminum Motor Mount Set is an ideal replacement part for your ARRMA vehicleFeaturesRed anodized aluminum 6mm thick motor plate for strong, accurate motor positioning and outstanding heat dissipation -  Gear cover has added protection for spur equipment, pinion and slipper clutch from dirt ingress - Difficult composite product for lasting toughness - Accuracy produced for constant fit to your chassis

SPECIFICATION

Developed to enable the fit of 36 series size motors (1" or 25.4mm motor screw spacing)

Pinion sizes 10T to 26T can be fitted when utilized with the 57T 0.8 module spur gearIncludes1 x Aluminum Motor Plate

1 x Power Module Housing

1 x Gear Cover

1 x M3 x 8mm Flat Head Screw

Want one more great item to match the above discussed item?

Ball Bearing 10x15x4mm 2RS (2)

Right here is a great item that many others have bought at the exact same time.

Slipper Clutch Maintenance Set

Right here is a great item that many others have bought at the exact same time.

Pinion Gear 15T 0.8mod 4x4

This is the 15 Tooth 0.8Mod Pinion Gear for the Arrma BLX 4x4 Cars.
**Does not fit the Mega variations.**

FEATURES:
Steel building
Number of teeth stamped on back of equipment for simple identification

CONSISTS OF:
15 Tooth 0.8Mod Pinion Gear with Set Screw

NEEDS:
2mm Hex Wrench (GPMR8011) for Set Screw

SPECS:
Number of Teeth: 15
Gear Pitch: 0.8Mod
Size of Tooth Area: 0.53" (13.5mm)
Hole Size: 0.196" (5mm)

This item is often gotten with the above discussed item.

C-Hubs 4x4 (2)

This is a set of C-Hubs for the Arrma
Granite Mega 4x4 Beast Truck, and the Senton Mega 4x4 Short Course Truck.

FEATURES:
Composite plastic building
Holds the steering obstructs in place

CONSISTS OF:
One each Left and Right C-Hub

The below item also pairs actually well with the item being talked about.

Bearing 10x15x4mm (2)

These are the 10x15x4mm Ball Bearings from Arrma.

FEATURES:
Steel building
Utilized in the differential of the Arrma Raider, Fury, ADX-10, Vortex
    Granite, and Mojave

CONSISTS OF:
2 10x15x4mm Ball Bearings

This item is often gotten with the above discussed item.

Body Clip Retainer 1/8 Scale Black (4)

These high quality body clip retainers tether your body clips to your bodyshell. This suggests that you do not lose your clips when they become detached from the body post during a roll-over  when running your lorry, implying no more lost clips when you have removed your bodyshell.

 FeaturesProduced from strong, flexible rubber to provide toughness

Specially developed bodyshell grommet attaches retainer to hole in bodyshell

Big pull tab permits fast and simple body clip removal even with wet or cold hands

ARRMA branded

Provided with plus size body clipsIncludes4 x ARRMA Body Clip Retainers

4 x Large size Body Clips

1 x Fitting Instructions

Specifications

Device Type: Body Clips

Part Type: Chassis Components