ARRMA HD 57T Spur Gear 0.8Mod

This HD 57T Spur Gear is made from premium, long lasting composite material for constant performance.

Features

Precision made equipment tooth configuration - Difficult composite material for long-lasting sturdiness and smooth equipment mesh – 57 teeth, 0.8 module

Consists of

1 x HD 57T Spur Gear

Often bought with the product that you are presently reading about.

15T 0.8Mod Safe-D5 Pinion Gear

Want an additional terrific product to compliment the above discussed product?

Aluminum Motor Mount Set

This premium Aluminum Motor Mount Set is a perfect replacement part for your ARRMA vehicleFeaturesRed anodized aluminum 6mm thick motor plate for strong, precise motor positioning and excellent heat dissipation -  Gear cover has included security for spur equipment, pinion and slipper clutch from dirt ingress - Difficult composite material for long-lasting sturdiness - Precision made for constant fit to your chassis

SPEC

Developed to allow the fit of 36 series size motors (1" or 25.4mm motor screw spacing)

Pinion sizes 10T to 26T can be fitted when utilized with the 57T 0.8 module spur gearIncludes1 x Aluminum Motor Plate

1 x Power Module Real estate

1 x Gear Cover

1 x M3 x 8mm Flat Head Screw

Want an additional terrific product to compliment the above discussed product?

Ball Bearing 10x15x4mm 2RS (2)

Right here is a terrific product that lots of others have bought at the exact same time.

Slipper Clutch Maintenance Set

Right here is a terrific product that lots of others have bought at the exact same time.

Pinion Gear 15T 0.8mod 4x4

This is the 15 Tooth 0.8Mod Pinion Gear for the Arrma BLX 4x4 Vehicles.
**Does not fit the Mega versions.**

FUNCTIONS:
Steel construction
Variety of teeth marked on back of equipment for simple recognition

CONSISTS OF:
15 Tooth 0.8Mod Pinion Gear with Set Screw

REQUIRES:
2mm Hex Wrench (GPMR8011) for Set Screw

SPECIFICATIONS:
Number of Teeth: 15
Gear Pitch: 0.8Mod
Diameter of Tooth Area: 0.53" (13.5mm)
Hole Diameter: 0.196" (5mm)

This product is often bought with the above discussed product.

C-Hubs 4x4 (2)

This is a pair of C-Hubs for the Arrma
Granite Mega 4x4 Monster Truck, and the Senton Mega 4x4 Short Course Truck.

FEATURES:
Composite plastic construction
Holds the steering obstructs in location

CONSISTS OF:
One each Left and Right C-Hub

The listed below product additionally sets really well with the product being discussed.

Bearing 10x15x4mm (2)

These are the 10x15x4mm Ball Bearings from Arrma.

FEATURES:
Steel construction
Used in the differential of the Arrma Raider, Fury, ADX-10, Vortex
    Granite, and Mojave

CONSISTS OF:
2 10x15x4mm Ball Bearings

This product is often bought with the above discussed product.

Body Clip Retainer 1/8 Scale Black (4)

These high quality body clip retainers tether your body clips to your bodyshell. This implies that you do not lose your clips when they become separated from the body post throughout a roll-over  when running your vehicle, suggesting no more lost clips when you have actually eliminated your bodyshell.

 FeaturesProduced from strong, flexible rubber to provide sturdiness

Specially developed bodyshell grommet connects retainer to hole in bodyshell

Big pull tab permits quick and simple body clip elimination even with damp or cold hands

ARRMA branded

Provided with plus size body clipsIncludes4 x ARRMA Body Clip Retainers

4 x Plus size Body Clips

1 x Fitting Directions

Requirements

Device Type: Body Clips

Part Type: Chassis Components