APC LP08O60SF 8x6 Slow Flyer Propeller

This is a 8x6 Slo-Flyer "tractor" (not a "pusher") aircraft propeller.
This prop produces a lot of torque even at low speeds.

FEATURES:
Computer-optimized design provides these props a thinner profile and
    more "bite" with less noise.
Lightweight molded nylon building lowers rotating mass for
    greater output and longer life.
Reinforcing carbon fibers help maintain true, continuous pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of little shaft finding rings
One finding ring guideline sheet

NEEDS:
ALL props need balancing (usage TOPQ5700)
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 8"
Pitch: 6

REMARKS:
Slo-Flyer props are Not designed for Radiance engines

This is a superb enhancement to the thing currently being reviewed.

Rimfire Prop Saver 28mm Motors

This is the ElectriFly Rimfire Prop Saver for usage on 28mm Motors.

FEATURES:
Aluminum building

SUCHES AS:
One Prop Saver
2 Rubber O-Rings
2 Bushings

NEEDS:
Installation on Rimfire 28mm Motor

Get this thing to improve the one you read around.

8x4 Thin Electric Prop

This is a 8x4E Thin Composite propeller from Advanced Accuracy Composites.
For use on Electric powered aircraft only (not for radiance engines).

FEATURES:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with five adjuster rings that adapt to various motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
5 composite adapter rings

NEEDS:
ALL props need balancing, this is VERY important, use TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Size: 8"
Pitch: 4
Hub inner diameter: 0.25"

This thing compliments the main item below.

8x6EP Thin Electric Pusher Propeller

This is a 8x6EP Thin Composite Propeller from Advanced Accuracy Composites.
For use on electric powered aircraft only (not for radiance engines).

FEATURES:
Gray composite building
Comes with five adjuster rings that adapt to various motor shafts.

INCLUDES:
One 8x6EP Thin Electric Propeller

NEEDS:
ALL props need balancing, this is VERY important, use TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Size: 8"
Pitch: 6
Hub inner diameter: 0.25" (6.3mm)

Frequently gotten with the thing that you are currently reading about.



This is a low-resistance, compact-size 2-Pin Ultra Plug Connector from Deans.
This design removes the possiblility of reverse polarity connections.
Provides a safe and secure connection for battery and motor connections on R/C vehicles.

INCLUDES:
One 2-Pin Male Ultra Plug WSDM1302
One 2-Pin Female Ultra Plug WSDM1303

NEEDS:
Soldering ports onto wires

Get this thing to improve the one you read around.

Tower Pro SG90 Servo

Functions:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specs:
Measurement : 23mm x 12mm x 29mm
Connector Wire Length : About 248mm
Running Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature level Variety : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packing content:
1 x 9g TITAN Servo Sets (with devices)