APC 9x7.5 Thin Electric Prop

This is a 9x7.5E Thin Composite propeller from Advanced Precision Composites.
For utilize on Electric powered aircraft only (not for glow engines).

FEATURES:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with five adjuster rings that adapt to different motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
5 composite adapter rings

NEEDS:
ALL props require balancing, this is CRUCIAL, utilize TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Size: 9" (229mm)
Pitch: 7.5
Hub inner diameter: 0.25" (605mm)

You will love this product if you have the product just above mentioned.

9x6 Thin Electric Prop

This is one R/C Plane 9x6E APC Thin-Electric Composite Propeller
by Landing Products.

FEATURES:
APC props are made using a pultrusion procedure. This approach
    causes the fiberglass "fibers" to be oriented axially in 1/2" long
    pellets, permitting a higher fiber (60%) to resin (nylon binder)
    density. Supplying considerably higher strength and tightness than
    glass filled nylon.
The additional tightness is useful to control of vibration
    resonance response.
The higher strength enables the use of thinner cross-sections,
    useful to weight and aerodynamic efficiency.
Competition proven.
Dark gray composite material.

INCLUDES:
One APC Thin-Electric Propeller

NEEDS:
ALL props require balancing (use TOPQ5700).
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECIFICATIONS:
Prop Size: 9"
Prop Pitch: 6
Hub Density: 0.40"
Hub Size: 0.79"
Weight: 0.035pounds
Engine Shaft Size: N/A

COMMENTS:
Not for use with glow engines.

This product compliments the main item right here.

Rimfire Prop Saver 28mm Motors

This is the ElectriFly Rimfire Prop Saver for use on 28mm Motors.

FEATURES:
Aluminum construction

INCLUDES:
One Prop Saver
2 Rubber O-Rings
2 Bushings

NEEDS:
Setup on Rimfire 28mm Motor

Numerous others have actually bought this product along with the product that you are currently reviewing.



These are the ElectriFly Prop Saver O-rings from Excellent Planes.

FEATURES:
Wraps around the prop to hold it on and safeguard it throughout crashes

INCLUDES:
5 prop saver O-rings

NEEDS:
Setup

Numerous others have actually bought this product along with the product that you are currently reviewing.

7x6E Thin Electric

This is a 7x6EP Thin Propeller from Advanced Precision Composites.
For utilize on electrical powered aircraft only (not for glow engines).

FEATURES:
Gray composite construction
Includes two adjuster rings that adapt to different motor shafts

INCLUDES:
One 7x6EP Thin Electric Propeller

NEEDS:
ALL props require balancing, this is CRUCIAL, utilize TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Size: 7"
Pitch: 6
Hub inner diameter: 0.25" (6.3mm)

Below is a wonderful product that several others have actually bought at the same time.

8x8 Thin Electric Propeller

This is a 8x8E Thin Composite propeller from Advanced Precision Composites.
For utilize on Electric powered aircraft only (not for glow engines).

FEATURES:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with five adjuster rings that adapt to different motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
5 composite adapter rings

NEEDS:
ALL props require balancing, this is CRUCIAL, utilize TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Size: 8" (203mm)
Pitch: 8
Hub inner diameter: 0.25" (6.3mm)