APC 9x7.5 Thin Electric Prop

This is a 9x7.5E Thin Composite propeller from Advanced Precision Composites.
For usage|utilize} on Electric powered airplane only (not for radiance engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with five adapter rings that adapt to different motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
Five composite adapter rings

REQUIRES:
ALL props need balancing, this is VERY important, usage|utilize} TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Diameter: 9" (229mm)
Pitch: 7.5
Center inner diameter: 0.25" (605mm)

You will certainly like this item if you have the item previously pointed out.

9x6 Thin Electric Prop

This is one R/C Plane 9x6E APC Thin-Electric Composite Propeller
by Landing Products.

FEATURES:
APC props are manufactured using a pultrusion process. This approach
    causes the fiberglass "fibers" to be oriented axially in 1/2" long
    pellets, permitting a greater fiber (60%) to resin (nylon binder)
    density. Supplying substantially higher strength and tightness than
    glass filled nylon.
The additional tightness is helpful to control of vibration
    resonance response.
The higher strength allows the usage of thinner cross-sections,
    helpful to weight and aerodynamic efficiency.
Competition proven.
Dark gray composite material.

INCLUDES:
One APC Thin-Electric Propeller

REQUIRES:
ALL props need balancing (usage TOPQ5700).
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECIFICATIONS:
Prop Diameter: 9"
Prop Pitch: 6
Center Density: 0.40"
Center Diameter: 0.79"
Weight: 0.035lbs
Engine Shaft Diameter: N/A

COMMENTS:
Not for use with glow engines.

This item compliments the main item right here.

Rimfire Prop Saver 28mm Motors

This is the ElectriFly Rimfire Prop Saver for use on 28mm Motors.

FEATURES:
Aluminum building

INCLUDES:
One Prop Saver
Two Rubber O-Rings
Two Bushings

REQUIRES:
Setup on Rimfire 28mm Motor

Lots of others have actually acquired this item along with the item that you are presently checking out.



These are the ElectriFly Prop Saver O-rings from Great Planes.

FEATURES:
Twists around the prop to hold it on and safeguard it during crashes

INCLUDES:
Five prop saver O-rings

REQUIRES:
Setup

Lots of others have actually acquired this item along with the item that you are presently checking out.

7x6E Thin Electric

This is a 7x6EP Thin Propeller from Advanced Precision Composites.
For use on electrical powered airplane only (not for radiance engines).

FEATURES:
Gray composite building
Features 2 adapter rings that adapt to different motor shafts

INCLUDES:
One 7x6EP Thin Electric Propeller

REQUIRES:
ALL props need balancing, this is VERY important, use TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Diameter: 7"
Pitch: 6
Center inner diameter: 0.25" (6.3mm)

Here is a great item that many others have actually purchased the very same time.

8x8 Thin Electric Propeller

This is a 8x8E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered airplane only (not for radiance engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with five adapter rings that adapt to different motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
Five composite adapter rings

REQUIRES:
ALL props need balancing, this is VERY important, use TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Diameter: 8" (203mm)
Pitch: 8
Center inner diameter: 0.25" (6.3mm)