APC 9x7.5 Thin Electric Prop

This is a 9x7.5E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered aircraft only (not for glow engines).

FUNCTIONS:
Gray composite propeller blades that put together onto a propeller hub.
Comes with 5 adapter rings that adapt to different motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
Five composite adapter rings

NEEDS:
ALL props require balancing, this is EXTREMELY IMPORTANT, use TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Diameter: 9" (229mm)
Pitch: 7.5
Hub inner size: 0.25" (605mm)

You will love this item if you have the item earlier discussed.

9x6 Thin Electric Prop

This is one R/C Airplane 9x6E APC Thin-Electric Composite Propeller
by Landing Products.

FEATURES:
APC props are made utilizing a pultrusion procedure. This method
    causes the fiberglass "fibers" to be oriented axially in 1/2" long
    pellets, permitting a higher fiber (60%) to resin (nylon binder)
    density. Supplying significantly greater strength and tightness than
    glass filled nylon.
The additional tightness is advantageous to control of vibration
    resonance response.
The greater strength permits the usage of thinner cross-sections,
    advantageous to weight and aerodynamic efficiency.
Competition proven.
Dark gray composite material.

INCLUDES:
One APC Thin-Electric Propeller

NEEDS:
ALL props require balancing (usage TOPQ5700).
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECS:
Prop Diameter: 9"
Prop Pitch: 6
Hub Thickness: 0.40"
Hub Diameter: 0.79"
Weight: 0.035lbs
Engine Shaft Diameter: N/A

COMMENTS:
Not for use with glow engines.

This product praises the main item below.

Rimfire Prop Saver 28mm Motors

This is the ElectriFly Rimfire Prop Saver for use on 28mm Motors.

FEATURES:
Aluminum building

INCLUDES:
One Prop Saver
2 Rubber O-Rings
2 Bushings

NEEDS:
Setup on Rimfire 28mm Motor

Lots of others have acquired this product together with the product that you are presently checking out.



These are the ElectriFly Prop Saver O-rings from Great Planes.

FEATURES:
Twists around the prop to hold it on and secure it throughout crashes

INCLUDES:
Five prop saver O-rings

NEEDS:
Setup

Lots of others have acquired this product together with the product that you are presently checking out.

7x6E Thin Electric

This is a 7x6EP Thin Propeller from Advanced Precision Composites.
For use on electric powered aircraft only (not for glow engines).

FUNCTIONS:
Gray composite building
Features 2 adapter rings that adapt to different motor shafts

INCLUDES:
One 7x6EP Thin Electric Propeller

NEEDS:
ALL props require balancing, this is EXTREMELY IMPORTANT, use TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Diameter: 7"
Pitch: 6
Hub inner size: 0.25" (6.3mm)

Right here is a excellent product that numerous others have bought at the exact same time.

8x8 Thin Electric Propeller

This is a 8x8E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered aircraft only (not for glow engines).

FUNCTIONS:
Gray composite propeller blades that put together onto a propeller hub.
Comes with 5 adapter rings that adapt to different motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
Five composite adapter rings

NEEDS:
ALL props require balancing, this is EXTREMELY IMPORTANT, use TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Diameter: 8" (203mm)
Pitch: 8
Hub inner size: 0.25" (6.3mm)