APC 9x6EP Thin Electric Pusher Prop

This is a 9x6E Thin Electric Pusher Propeller from
Advanced Accuracy Composites.

FEATURES:
Gray composite one-piece construction

CONSISTS OF:
One 9x6E Thin Electric Pusher Propeller with 0.128, 0.158, 0.197,
    0.237 and 0.313" adapter rings

REQUIRES:
ALL props need balancing, this is CRUCIAL, use TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Size: 9"
Pitch: 6
Hub inner diameter: 0.25" (6.35mm)

COMMENTS:
For electrical usage just. Do not use with fuel or nitro powered
    airplane.

This is a great addition to the product currently being discussed.

9x6 Thin Electric Prop

This is one R/C Aircraft 9x6E APC Thin-Electric Composite Propeller
by Landing Products.

FEATURES:
APC props are produced using a pultrusion process. This technique
    triggers the fiberglass "fibers" to be oriented axially in 1/2" long
    pellets, allowing for a higher fiber (60%) to resin (nylon binder)
    density. Supplying significantly greater strength and tightness than
    glass filled nylon.
The extra tightness is helpful to control of vibration
    resonance response.
The greater strength permits the usage of thinner cross-sections,
    helpful to weight and aerodynamic efficiency.
Competition proven.
Dark gray composite material.

INCLUDES:
One APC Thin-Electric Propeller

REQUIRES:
ALL props need balancing (usage TOPQ5700).
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECIFICATIONS:
Prop Size: 9"
Prop Pitch: 6
Hub Thickness: 0.40"
Hub Size: 0.79"
Weight: 0.035lbs
Engine Shaft Size: N/A

COMMENTS:
Not for use with radiance engines.

You will certainly love this item if you have the item earlier discussed.

Tower Pro SG90 Servo

Features:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specifications:
Dimension : 23mm x 12mm x 29mm
Connector Wire Length : About 248mm
Operating Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature Range : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packing content:
1 x 9g TITAN Servo Sets (with devices)

Want an additional great product to match the above discussed product?

A2217-8 1100Kv Brushless Outrunner Motor, 4mm Shaft, 3.5mm Bulle

A2217-8 Brushless motor Spec

No. Of cells:
Ni-MH: 6-10
LiPo: 2-3

RPM/V: 1100KV

Max. effectiveness present: 5-16 A(>75%)

NoLoad current/ 10 V: 1.0 A

Current capacity: 18 A/60 s

Max. effectiveness: 81%

Shaft diameter: 4 mm

Weight with cable televisions: 70 g

Internal Resistance: 125m

Measurements (mm): 27.5 x 30

Suggested Model Weight: 300-800 g

Recommended Prop: 10 x 5 or 11 x 5

This is a great addition to the product currently being discussed.

2250mAh 11.1V 35C - Ultra Power Series

Pulse Ultra batteries bring a brand-new level of power to the RC scene, based upon cutting edge lithium polymer technology, and taking advantage of all the technological gains within this amazing industry. Pulse is about power & performance at an expense that can be managed. Not does premium power come at a premium rate – Pulse provides it all in one pulse quickening punch.

Delivering extreme power for your RC applications, Pulse batteries deliver everything you could think of at a cost never ever seen. Adding to the addictive power of Pulse Ultra batteries is the 5C charge rate, permitting you to charge in rapid succession, leaving previous 1C LiPo batteries back at the battery charger as you rip through the skies above.

Ranging from 35C, 45C, and mind blowing 65C discharge rates, Pulse has you covered in every method possible, delivering mind numbing power levels that will take your flight to an entirely new level of extreme. If you're looking for power, you just found it. Pulse provides extreme power for extreme pilots, when it pertains to value, Pulse simply cannot be beat.
Feel the pulse, and get a brand-new Pulse Ultra Battery for your 3D demands!

Specifications:

Cell Count: 3S
Capacity: 2250mah
Discharge Rate: 30C
Charge Rate: 5C
Measurements: 155mm x 45mm x 50mm (LxWxH)
Weight: 799g
Balance Tap: JST-XH
AWG: TBA (To Be Revealed)

Product Note:

Pulse batteries do not featured power leads, and will need the end user to solder their own style of battery adapter for the battery to be correctly used. Pulse batteries include bare leads covered with heat diminish protection, and are all set for the adapter of choice to be soldered to the positive/negative leads.

Pulse Details:

www.pulsebattery.com

Pulse Frequently Asked Question:

Limited Service warranty

Pulse Batteries include a warranty against any malfunctioning batteries we make, and warranty all manufacturer related defects or defects. Pulse insures that all packs are correctly balanced, but please be sure to inspect your Pulse battery upon arrival for any faults, such as low voltage, cell imbalances, solder joints, and other such flaw. If any such defects occur, Pulse will be sure to cover all claims within a 90 day period; all claims after the 90 day period of purchase will not go through warranty, so please be sure to thoroughly check your new Pulse battery upon arrival.

In terms of warranty, if any warranty related issues occur, or product defects are seen, please contact the distributor you acquired your Pulse battery from, as the distributor will deal with warranty related matters.

Pulse Batteries – Your Concerns End Here.

Have a question concerning Pulse batteries? We have put together a spread of numerous concerns that are asked them about Lithium Polymer batteries, together with Pulse batteries too. Naturally, if you don't find your response here, don't hesitate to drop us a line, as we are constantly happy to help.



Q: What is a "C" score, and exactly what does it indicate to me?

A: "C" scores are classified in (2) areas – discharge rate, and charge rate. Pulse Batteries are rated at 35C, 45C, and 65C in discharge rates – this is based upon how much amperage can be provided, or in simpler terms, how much power your battery has to give. The greater the "C" score, the more power the battery can give out.

As for the charge rate, Pulse batteries are rated at 5C, which means they can be charged 5 times faster than a traditional 1C Lithium Polymer battery. In other words, Pulse batteries can be charged at really high rates of power for rapid charge times, removing the wait time of traditional batteries that are restricted to 1C.

Q: What is mah, or capacity, in terms of Pulse batteries?

A: "Mah" short for milliamp hours, is a reading of capacity, or how much energy the battery is able to store. Mah, or Capacity, directly associates with flight time, and indirectly associates with power output, as greater capacity batteries also have higher amperage to deliver, when asked to do so.

Q: For how long does it take a Pulse battery to charge?

A: Thinking about Pulse batteries are rated at a 5C charge rate, if your battery charger can deliver the essential amperage to charge at 5C, charge times can be as low as 15 minutes, depending upon the battery charger being used.

Q: How can I figure out how many amps my Pulse battery can be charged at?

A: To figure out how many amps you can securely charge a Pulse battery, a little math is in order. We will use a basic formula to figure out charge rates - divide the "mah" of the battery by 1,000 (let's say a 2200mah battery), which pertains to 2200 / 1,000 = 2.2. Now, multiply it against the "charge" score of the battery, which in this case is 5C – 2.2 x 5 = 11. So, if we have a 2200mah 5C battery (2200 divided by 1,000 = 2.2), we have 2.2 as our base number, which we then multiply against the charge score of "5C" which gives us a variety of 11 – (2.2 x 5 = 11). What this means is that at a 5C score, a 2200mah Pulse battery is capable of being charged at 11.0A amps of power.