APC 9x6EP Thin Electric Pusher Prop

This is a 9x6E Thin Electric Pusher Propeller from
Advanced Accuracy Composites.

FEATURES:
Gray composite one-piece building and construction

INCLUDES:
One 9x6E Thin Electric Pusher Propeller with 0.128, 0.158, 0.197,
    0.237 and 0.313" adapter rings

NEEDS:
ALL props need balancing, this is EXTREMELY IMPORTANT, usage|utilize} TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Diameter: 9"
Pitch: 6
Hub inner size: 0.25" (6.35mm)

COMMENTS:
For electrical use only. Do not use with gasoline or nitro powered
    airplane.

This is a superb addition to the thing currently being gone over.

9x6 Thin Electric Prop

This is one R/C Aircraft 9x6E APC Thin-Electric Composite Propeller
by Landing Products.

FEATURES:
APC props are made utilizing a pultrusion process. This approach
    causes the fiberglass "fibers" to be oriented axially in 1/2" long
    pellets, permitting a greater fiber (60%) to resin (nylon binder)
    density. Offering significantly greater strength and tightness than
    glass filled nylon.
The extra tightness is helpful to control of vibration
    resonance response.
The greater strength allows the use of thinner cross-sections,
    helpful to weight and aerodynamic efficiency.
Competition proven.
Dark gray composite material.

INCLUDES:
One APC Thin-Electric Propeller

NEEDS:
ALL props need balancing (use TOPQ5700).
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECIFICATIONS:
Prop Diameter: 9"
Prop Pitch: 6
Hub Thickness: 0.40"
Hub Diameter: 0.79"
Weight: 0.035pounds
Engine Shaft Diameter: N/A

COMMENTS:
Not for use with glow engines.

You will like this thing if you have the thing just above pointed out.

Tower Pro SG90 Servo

Features:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specifications:
Measurement : 23mm x 12mm x 29mm
Adapter Wire Length : About 248mm
Operating Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature level Variety : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packing content:
1 x 9g TITAN Servo Sets (with devices)

Want one more fantastic thing to enhance the above pointed out thing?

A2217-8 1100Kv Brushless Outrunner Motor, 4mm Shaft, 3.5mm Bulle

A2217-8 Brushless motor Spec

No. Of cells:
Ni-MH: 6-10
LiPo: 2-3

RPM/V: 1100KV

Max. efficiency present: 5-16 A(>75%)

NoLoad current/ 10 V: 1.0 A

Current capability: 18 A/60 s

Max. efficiency: 81%

Shaft size: 4 mm

Weight with cables: 70 g

Internal Resistance: 125m

Measurements (mm): 27.5 x 30

Advised Design Weight: 300-800 g

Recommended Prop: 10 x 5 or 11 x 5

This is a superb addition to the thing currently being gone over.

2250mAh 11.1V 35C - Ultra Power Series

Pulse Ultra batteries bring a brand-new level of power to the RC scene, based upon cutting edge lithium polymer innovation, and taking advantage of all the technological gains within this fantastic industry. Pulse has to do with power & efficiency at an expense that can be managed. No more does premium power come at a premium rate – Pulse delivers it all in one pulse accelerating punch.

Delivering intense power for your RC applications, Pulse batteries provide everything you might envision at a rate never ever seen. Contributing to the addictive power of Pulse Ultra batteries is the 5C charge rate, permitting you to recharge in fast succession, leaving previous 1C LiPo batteries back at the charger as you rip through the skies above.

Ranging from 35C, 45C, and mind blowing 65C discharge rates, Pulse has you covered in every way possible, delivering mind numbing power levels that will take your flight to an entirely new level of extreme. If you're searching for power, you simply discovered it. Pulse delivers intense power for intense pilots, when it concerns value, Pulse just cannot be beat.
Feel the pulse, and grab a brand-new Pulse Ultra Battery for your 3D demands!

Specifications:

Cell Count: THREE
Capability: 2250mah
Discharge Rate: 30C
Charge Rate: 5C
Measurements: 155mm x 45mm x 50mm (LxWxH)
Weight: 799g
Balance Tap: JST-XH
AWG: TBA (To Be Announced)

Item Note:

Pulse batteries do not come with power leads, and will need the end user to solder their own design of battery connector for the battery to be correctly used. Pulse batteries have bare leads covered with heat shrink security, and are all set for the connector of option to be soldered to the positive/negative leads.

Pulse Information:

www.pulsebattery.com

Pulse Frequently Asked Question:

Limited Service warranty

Pulse Batteries feature a service warranty versus any malfunctioning batteries we produce, and warranty all producer associated flaws or flaws. Pulse guarantees that all packs are correctly balanced, however please make certain to check your Pulse battery upon arrival for any faults, such as low voltage, cell imbalances, solder joints, and other such problem. If any such flaws occur, Pulse will make certain to cover all insurance claims within a 90 day period; all insurance claims after the 90 day period of purchase will not go through warranty, so please make certain to thoroughly examine your new Pulse battery upon arrival.

In terms of warranty, if any warranty associated problems occur, or product flaws are seen, please get in touch with the supplier you purchased your Pulse battery from, as the supplier will deal with warranty associated matters.

Pulse Batteries – Your Concerns End Here.

Have a question concerning Pulse batteries? We have put together a spread of lots of questions that are asked them about Lithium Polymer batteries, together with Pulse batteries also. Naturally, if you don't find your response here, do not hesitate to drop us a line, as we are always pleased to assist.



Q: What is a "C" rating, and exactly what does it mean to me?

A: "C" ratings are categorized in (2) areas – discharge rate, and charge rate. Pulse Batteries are rated at 35C, 45C, and 65C in discharge rates – this is based upon how much amperage can be delivered, or in simpler terms, how much power your battery has to give. The greater the "C" rating, the more power the battery can give out.

As for the charge rate, Pulse batteries are rated at 5C, which implies they can be charged 5 times faster than a conventional 1C Lithium Polymer battery. In other words, Pulse batteries can be charged at really high rates of power for fast charge times, eliminating the wait time of standard batteries that are restricted to 1C.

Q: What is mah, or capability, in terms of Pulse batteries?

A: "Mah" brief for milliamp hours, is a reading of capability, or how much energy the battery is able to store. Mah, or Capability, directly associates with flight time, and indirectly associates with power output, as greater capability batteries likewise have greater amperage to provide, when asked to do so.

Q: How long does it take a Pulse battery to charge?

A: Considering Pulse batteries are rated at a 5C charge rate, if your charger can provide the essential amperage to charge at 5C, charge times can be as low as 15 minutes, depending upon the charger being used.

Q: How can I figure out the number of amps my Pulse battery can be charged at?

A: To figure out the number of amps you can safely charge a Pulse battery, a little mathematics is in order. We will use a basic formula to figure out charge rates - divide the "mah" of the battery by 1,000 (let's say a 2200mah battery), which concerns 2200 / 1,000 = 2.2. Now, multiply it versus the "charge" rating of the battery, which in this case is 5C – 2.2 x 5 = 11. So, if we have a 2200mah 5C battery (2200 divided by 1,000 = 2.2), we have 2.2 as our base number, which we then multiply versus the charge rating of "5C" which gives us a number of 11 – (2.2 x 5 = 11). What this implies is that at a 5C rating, a 2200mah Pulse battery is capable of being charged at 11.0A amps of power.