APC 9x6EP Thin Electric Pusher Prop

This is a 9x6E Thin Electric Pusher Propeller from
Advanced Precision Composites.

FEATURES:
Gray composite one-piece building and construction

CONSISTS OF:
One 9x6E Thin Electric Pusher Propeller with 0.128, 0.158, 0.197,
    0.237 and 0.313" adapter rings

REQUIRES:
ALL props require balancing, this is ESSENTIAL, usage|utilize} TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Size: 9"
Pitch: 6
Hub inner size: 0.25" (6.35mm)

REMARKS:
For electric use just. Do not use with fuel or nitro powered
    aircraft.

This is a great addition to the item presently being reviewed.

9x6 Thin Electric Prop

This is one R/C Plane 9x6E APC Thin-Electric Composite Propeller
by Landing Products.

FEATURES:
APC props are made using a pultrusion procedure. This approach
    causes the fiberglass "fibers" to be oriented axially in 1/2" long
    pellets, enabling a greater fiber (60%) to resin (nylon binder)
    density. Providing significantly higher strength and tightness than
    glass filled nylon.
The additional tightness is beneficial to control of vibration
    resonance response.
The higher strength allows the use of thinner cross-sections,
    beneficial to weight and aerodynamic efficiency.
Competition proven.
Dark gray composite material.

INCLUDES:
One APC Thin-Electric Propeller

REQUIRES:
ALL props require balancing (use TOPQ5700).
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECIFICATIONS:
Prop Size: 9"
Prop Pitch: 6
Hub Density: 0.40"
Hub Size: 0.79"
Weight: 0.035lbs
Engine Shaft Size: N/A

COMMENTS:
Not for use with glow engines.

You will certainly enjoy this thing if you have the thing earlier stated.

Tower Pro SG90 Servo

Features:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specs:
Measurement : 23mm x 12mm x 29mm
Adapter Wire Length : About 248mm
Operating Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature level Range : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packaging content:
1 x 9g TITAN Servo Sets (with devices)

Want an additional wonderful item to compliment the above pointed out item?

A2217-8 1100Kv Brushless Outrunner Motor, 4mm Shaft, 3.5mm Bulle

A2217-8 Brushless motor Specification

No. Of cells:
Ni-MH: 6-10
LiPo: 2-3

RPM/V: 1100KV

Max. efficiency existing: 5-16 A(>75%)

NoLoad current/ 10 V: 1.0 A

Current capacity: 18 A/60 s

Max. efficiency: 81%

Shaft size: 4 mm

Weight with cables: 70 g

Internal Resistance: 125m

Dimensions (mm): 27.5 x 30

Advised Design Weight: 300-800 g

Recommended Prop: 10 x 5 or 11 x 5

This is a great addition to the item presently being reviewed.

2250mAh 11.1V 35C - Ultra Power Series

Pulse Ultra batteries bring a new level of power to the RC scene, based upon cutting edge lithium polymer innovation, and making the most of all the technological gains within this incredible industry. Pulse has to do with power & performance at a cost that can be afforded. Not does exceptional power come at a premium rate – Pulse provides it all in one pulse speeding up punch.

Delivering intense power for your RC applications, Pulse batteries deliver everything you could picture at a price never ever seen. Contributing to the addicting power of Pulse Ultra batteries is the 5C charge rate, permitting you to recharge in fast succession, leaving previous 1C LiPo batteries back at the battery charger as you rip through the skies above.

Ranging from 35C, 45C, and mind blowing 65C discharge rates, Pulse has you covered in every method possible, providing mind numbing power levels that will take your flight to a completely new level of extreme. If you're looking for power, you just found it. Pulse provides intense power for intense pilots, and when it pertains to value, Pulse merely can't be beat.
Feel the pulse, and get hold of a new Pulse Ultra Battery for your 3D demands!

Specifications:

Cell Count: THREE
Capability: 2250mah
Discharge Rate: 30C
Charge Rate: 5C
Dimensions: 155mm x 45mm x 50mm (LxWxH)
Weight: 799g
Balance Tap: JST-XH
AWG: TBA (To Be Announced)

Product Note:

Pulse batteries do not had power leads, and will require the end user to solder their own design of battery connector for the battery to be appropriately utilized. Pulse batteries feature bare leads covered with heat shrink protection, and are all set for the connector of option to be soldered to the positive/negative leads.

Pulse Info:

www.pulsebattery.com

Pulse FAQ:

Limited Guarantee

Pulse Batteries feature a warranty against any defective batteries we manufacture, and service warranty all producer associated flaws or flaws. Pulse insures that packs are appropriately balanced, however please be sure to check your Pulse battery upon arrival for any faults, such as low voltage, cell imbalances, solder joints, and other such flaw. If any such flaws emerge, Pulse will be sure to cover all insurance claims within a 90 day period; all insurance claims after the 90 day period of purchase will not be subject to service warranty, so please be sure to thoroughly inspect your new Pulse battery upon arrival.

In terms of service warranty, if any service warranty associated issues emerge, or item flaws are seen, please call the supplier you acquired your Pulse battery from, as the supplier will deal with service warranty associated matters.

Pulse Batteries – Your Questions End Here.

Have a question concerning Pulse batteries? We have put together a spread of many questions that are inquired about Lithium Polymer batteries, along with Pulse batteries also. Of course, if you don't discover your response here, don't hesitate to drop us a line, as we are always pleased to assist.



Q: What is a "C" score, and exactly what does it suggest to me?

A: "C" ratings are categorized in (2) areas – discharge rate, and charge rate. Pulse Batteries are ranked at 35C, 45C, and 65C in discharge rates – this is based upon just how much amperage can be provided, or in easier terms, just how much power your battery has to offer. The higher the "C" score, the more power the battery can offer out.

As for the charge rate, Pulse batteries are ranked at 5C, which suggests they can be charged 5 times faster than a conventional 1C Lithium Polymer battery. In short, Pulse batteries can be charged at very high rates of power for fast charge times, eliminating the wait time of traditional batteries that are restricted to 1C.

Q: What is mah, or capacity, in regards to Pulse batteries?

A: "Mah" brief for milliamp hours, is a reading of capacity, or just how much energy the battery has the ability to shop. Mah, or Capability, straight connects to flight time, and indirectly connects to power output, as higher capacity batteries likewise have higher amperage to deliver, when asked to do so.

Q: How long does it take a Pulse battery to charge?

A: Thinking about Pulse batteries are ranked at a 5C charge rate, if your battery charger can deliver the needed amperage to charge at 5C, charge times can be as low as 15 minutes, relying on the battery charger being used.

Q: How can I figure out the number of amps my Pulse battery can be charged at?

A: To figure out the number of amps you can securely charge a Pulse battery, a little mathematics is in order. We will use a simple formula to figure out charge rates - divide the "mah" of the battery by 1,000 (let's state a 2200mah battery), which pertains to 2200 / 1,000 = 2.2. Now, multiply it against the "charge" score of the battery, which in this case is 5C – 2.2 x 5 = 11. So, if we have a 2200mah 5C battery (2200 divided by 1,000 = 2.2), we have 2.2 as our base number, which we then multiply against the charge score of "5C" which offers us a number of 11 – (2.2 x 5 = 11). What this suggests is that at a 5C score, a 2200mah Pulse battery is capable of being charged at 11.0A amps of power.