APC 8x4 Thin Electric Prop

This is a 8x4E Thin Composite propeller from Advanced Accuracy Composites.
For use on Electric powered airplane just (not for radiance engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with 5 adapter rings that adapt to various motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
Five composite adapter rings

REQUIRES:
ALL props need balancing, this is ESSENTIAL, use TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Diameter: 8"
Pitch: 4
Hub inner diameter: 0.25"

This is a great addition to the product presently being discussed.

Tower Pro SG90 Servo

Functions:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specs:
Dimension : 23mm x 12mm x 29mm
Adapter Wire Length : About 248mm
Running Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature level Variety : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packing content:
1 x 9g TITAN Servo Sets (with devices)

This is a great addition to the product presently being discussed.

8x6 Thin Electric Prop

This is a 8x6E Thin Composite propeller from Advanced Accuracy Composites.
For use on Electric powered airplane just (not for radiance engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with 5 adapter rings that adapt to various motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
Five composite adapter rings

REQUIRES:
ALL props need balancing, this is ESSENTIAL, use TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Diameter: 8"
Pitch: 6
Hub inner diameter: 0.25"

This product compliments the main item right here.

8x3.8 Slow Flyer Propeller

This is a 8x3.8 Slo-Flyer "tractor" (not a "pusher") plane propeller.
This prop produces a great deal of torque even at low speeds.

FEATURES:
Computer-optimized design gives these props a thinner profile and
    more "bite" with less noise.
Lightweight formed nylon construction minimizes rotating mass for
    greater output and longer life.
Reinforcing carbon fibers help maintain real, consistent pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of little shaft locating rings
One locating ring direction sheet

REQUIRES:
ALL props need balancing (use TOPQ5700)
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 8"
Pitch: 3.8

COMMENTS:
Slo-Flyer props are Not designed for Glow engines

Right here is a wonderful product that several others have actually bought at the same time.

7x5 Thin Electric Prop

This is a 7x5E Thin Composite propeller from Advanced Accuracy Composites.
For use on Electric powered airplane just (not for radiance engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with two adapter rings that adapt to various motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
2 composite adapter rings
One direction sheet

REQUIRES:
ALL props need balancing, this is ESSENTIAL, use TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Diameter: 7"
Pitch: 5
Hub inner diameter: 0.25"