APC 7x6E Thin Electric

This is a 7x6EP Thin Propeller from Advanced Accuracy Composites.
For utilize on electric powered aircraft only (not for radiance|radiance} engines).

FEATURES:
Gray composite building and construction
Has 2 adjuster rings that adapt to various motor shafts

CONSISTS OF:
One 7x6EP Thin Electric Propeller

REQUIRES:
ALL props require balancing, this is VERY important, utilize TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Diameter: 7"
Pitch: 6
Center inner size: 0.25" (6.3mm)

This is a great addition to the product currently being gone over.

7x5 Thin Electric Prop

This is a 7x5E Thin Composite propeller from Advanced Accuracy Composites.
For utilize on Electric powered aircraft only (not for radiance engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with 2 adjuster rings that adapt to various motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
2 composite adapter rings
One guideline sheet

REQUIRES:
ALL props require balancing, this is VERY important, utilize TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Diameter: 7"
Pitch: 5
Center inner size: 0.25"

This is a great addition to the product currently being gone over.

Rimfire Prop Saver 28mm Motors

This is the ElectriFly Rimfire Prop Saver for use on 28mm Motors.

FEATURES:
Aluminum building and construction

CONSISTS OF:
One Prop Saver
2 Rubber O-Rings
2 Bushings

REQUIRES:
Installation on Rimfire 28mm Motor

This product is often acquired with the above pointed out product.

8x6 Thin Electric Prop

This is a 8x6E Thin Composite propeller from Advanced Accuracy Composites.
For utilize on Electric powered aircraft only (not for radiance engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with 5 adjuster rings that adapt to various motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
5 composite adapter rings

REQUIRES:
ALL props require balancing, this is VERY important, utilize TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Diameter: 8"
Pitch: 6
Center inner size: 0.25"

Get this product to improve the one you are reading around.

9x6 Thin Electric Prop

This is one R/C Airplane 9x6E APC Thin-Electric Composite Propeller
by Landing Products.

FEATURES:
APC props are produced using a pultrusion procedure. This technique
    causes the fiberglass "fibers" to be oriented axially in 1/2" long
    pellets, enabling a greater fiber (60%) to resin (nylon binder)
    density. Offering substantially greater strength and tightness than
    glass filled nylon.
The additional tightness is helpful to control of vibration
    resonance response.
The greater strength allows the use of thinner cross-sections,
    helpful to weight and aerodynamic efficiency.
Competition proven.
Dark gray composite material.

INCLUDES:
One APC Thin-Electric Propeller

REQUIRES:
ALL props require balancing (use TOPQ5700).
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECS:
Prop Diameter: 9"
Prop Pitch: 6
Center Thickness: 0.40"
Center Diameter: 0.79"
Weight: 0.035lbs
Engine Shaft Diameter: N/A

COMMENTS:
Not for use with glow engines.