APC 7x6E Thin Electric

This is a 7x6EP Thin Propeller from Advanced Precision Composites.
For utilize on electric powered aircraft only (not for radiance|radiance} engines).

FEATURES:
Gray composite building and construction
Includes two adapter rings that adapt to various motor shafts

CONSISTS OF:
One 7x6EP Thin Electric Propeller

NEEDS:
ALL props need balancing, this is ESSENTIAL, utilize TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Diameter: 7"
Pitch: 6
Center inner size: 0.25" (6.3mm)

This is a wonderful enhancement to the item presently being talked about.

7x5 Thin Electric Prop

This is a 7x5E Thin Composite propeller from Advanced Precision Composites.
For utilize on Electric powered aircraft only (not for radiance engines).

FEATURES:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with two adapter rings that adapt to various motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
2 composite adapter rings
One guideline sheet

NEEDS:
ALL props need balancing, this is ESSENTIAL, utilize TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Diameter: 7"
Pitch: 5
Center inner size: 0.25"

This is a wonderful enhancement to the item presently being talked about.

Rimfire Prop Saver 28mm Motors

This is the ElectriFly Rimfire Prop Saver for usage on 28mm Motors.

FEATURES:
Aluminum building and construction

CONSISTS OF:
One Prop Saver
2 Rubber O-Rings
2 Bushings

NEEDS:
Setup on Rimfire 28mm Motor

This item is regularly acquired with the above pointed out item.

8x6 Thin Electric Prop

This is a 8x6E Thin Composite propeller from Advanced Precision Composites.
For utilize on Electric powered aircraft only (not for radiance engines).

FEATURES:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with 5 adapter rings that adapt to various motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
Five composite adapter rings

NEEDS:
ALL props need balancing, this is ESSENTIAL, utilize TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Diameter: 8"
Pitch: 6
Center inner size: 0.25"

Get this item to enhance the one you are reading about.

9x6 Thin Electric Prop

This is one R/C Aircraft 9x6E APC Thin-Electric Composite Propeller
by Landing Products.

FEATURES:
APC props are made utilizing a pultrusion procedure. This technique
    causes the fiberglass "fibers" to be oriented axially in 1/2" long
    pellets, permitting a greater fiber (60%) to resin (nylon binder)
    density. Offering significantly greater strength and tightness than
    glass filled nylon.
The added tightness is helpful to control of vibration
    resonance response.
The greater strength enables the usage of thinner cross-sections,
    helpful to weight and aerodynamic efficiency.
Competition proven.
Dark gray composite material.

INCLUDES:
One APC Thin-Electric Propeller

NEEDS:
ALL props need balancing (usage TOPQ5700).
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECS:
Prop Diameter: 9"
Prop Pitch: 6
Center Density: 0.40"
Center Diameter: 0.79"
Weight: 0.035lbs
Engine Shaft Diameter: N/A

COMMENTS:
Not for use with glow engines.