APC 7x6E Thin Electric

This is a 7x6EP Thin Propeller from Advanced Precision Composites.
For use on electrical powered airplane just (not for glow engines).

FEATURES:
Gray composite building
Features two adapter rings that adapt to different motor shafts

CONSISTS OF:
One 7x6EP Thin Electric Propeller

REQUIRES:
ALL props require balancing, this is EXTREMELY IMPORTANT, use TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Size: 7"
Pitch: 6
Hub inner size: 0.25" (6.3mm)

This is a great addition to the product currently being reviewed.

7x5 Thin Electric Prop

This is a 7x5E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered airplane just (not for glow engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with two adapter rings that adapt to different motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
Two composite adapter rings
One direction sheet

REQUIRES:
ALL props require balancing, this is EXTREMELY IMPORTANT, use TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Size: 7"
Pitch: 5
Hub inner size: 0.25"

This is a great addition to the product currently being reviewed.

Rimfire Prop Saver 28mm Motors

This is the ElectriFly Rimfire Prop Saver for usage on 28mm Motors.

FEATURES:
Aluminum building

CONSISTS OF:
One Prop Saver
Two Rubber O-Rings
Two Bushings

REQUIRES:
Setup on Rimfire 28mm Motor

This product is frequently purchased with the above mentioned product.

8x6 Thin Electric Prop

This is a 8x6E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered airplane just (not for glow engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with five adapter rings that adapt to different motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
Five composite adapter rings

REQUIRES:
ALL props require balancing, this is EXTREMELY IMPORTANT, use TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Size: 8"
Pitch: 6
Hub inner size: 0.25"

Get this product to improve the one you read around.

9x6 Thin Electric Prop

This is one R/C Airplane 9x6E APC Thin-Electric Composite Propeller
by Landing Products.

FEATURES:
APC props are manufactured using a pultrusion process. This method
    causes the fiberglass "fibers" to be oriented axially in 1/2" long
    pellets, permitting a greater fiber (60%) to resin (nylon binder)
    density. Supplying substantially higher strength and tightness than
    glass filled nylon.
The extra tightness is helpful to control of vibration
    resonance response.
The higher strength permits the usage of thinner cross-sections,
    helpful to weight and aerodynamic efficiency.
Competition proven.
Dark gray composite material.

INCLUDES:
One APC Thin-Electric Propeller

REQUIRES:
ALL props require balancing (usage TOPQ5700).
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECIFICATIONS:
Prop Size: 9"
Prop Pitch: 6
Hub Density: 0.40"
Hub Size: 0.79"
Weight: 0.035pounds
Engine Shaft Size: N/A

COMMENTS:
Not for use with glow engines.