APC 7x6E Thin Electric

This is a 7x6EP Thin Propeller from Advanced Accuracy Composites.
For utilize on electrical powered aircraft only (not for glow engines).

FUNCTIONS:
Gray composite building
Has two adjuster rings that adapt to different motor shafts

INCLUDES:
One 7x6EP Thin Electric Propeller

REQUIRES:
ALL props need balancing, this is ESSENTIAL, utilize TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Diameter: 7"
Pitch: 6
Hub inner size: 0.25" (6.3mm)

This is a fantastic addition to the product presently being discussed.

7x5 Thin Electric Prop

This is a 7x5E Thin Composite propeller from Advanced Accuracy Composites.
For utilize on Electric powered aircraft only (not for glow engines).

FUNCTIONS:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with two adjuster rings that adapt to different motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
Two composite adapter rings
One guideline sheet

REQUIRES:
ALL props need balancing, this is ESSENTIAL, utilize TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Diameter: 7"
Pitch: 5
Hub inner size: 0.25"

This is a fantastic addition to the product presently being discussed.

Rimfire Prop Saver 28mm Motors

This is the ElectriFly Rimfire Prop Saver for usage on 28mm Motors.

FEATURES:
Aluminum building

INCLUDES:
One Prop Saver
Two Rubber O-Rings
Two Bushings

REQUIRES:
Setup on Rimfire 28mm Motor

This product is frequently gotten with the above pointed out product.

8x6 Thin Electric Prop

This is a 8x6E Thin Composite propeller from Advanced Accuracy Composites.
For utilize on Electric powered aircraft only (not for glow engines).

FUNCTIONS:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with 5 adjuster rings that adapt to different motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
5 composite adapter rings

REQUIRES:
ALL props need balancing, this is ESSENTIAL, utilize TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Diameter: 8"
Pitch: 6
Hub inner size: 0.25"

Get this product to improve the one you are reading around.

9x6 Thin Electric Prop

This is one R/C Aircraft 9x6E APC Thin-Electric Composite Propeller
by Landing Products.

FEATURES:
APC props are manufactured using a pultrusion process. This technique
    causes the fiberglass "fibers" to be oriented axially in 1/2" long
    pellets, allowing for a higher fiber (60%) to resin (nylon binder)
    density. Offering substantially higher strength and tightness than
    glass filled nylon.
The added tightness is beneficial to control of vibration
    resonance response.
The higher strength permits the usage of thinner cross-sections,
    beneficial to weight and aerodynamic efficiency.
Competition proven.
Dark gray composite material.

INCLUDES:
One APC Thin-Electric Propeller

REQUIRES:
ALL props need balancing (usage TOPQ5700).
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECS:
Prop Diameter: 9"
Prop Pitch: 6
Hub Density: 0.40"
Hub Diameter: 0.79"
Weight: 0.035pounds
Engine Shaft Diameter: N/A

COMMENTS:
Not for use with glow engines.