APC 6x4 Thin Electric Prop

This is a 6x4E Thin Composite propeller from Advanced Precision Composites.
For utilize on Electric powered airplane only (not for glow engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with 2 adapter rings that adapt to different motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
Two composite adapter rings
One instruction sheet

REQUIRES:
Assembly onto motor or gear drive unit in your Electric plane.
Balancing

SPECS:
Diameter: 6"
Pitch: 4
Center inner size: 0.25"

COMMENTS:
Usage Speed 400 Electric motors.

This item is frequently acquired with the above mentioned item.

6x4 Speed 400 Electric Pusher Prop

This is a 6x4 Speed 400 Electric Pusher Propeller
from Advanced Precision Composites.
For utilize on Electric powered airplane only, not for glow powered engines.

FEATURES:
Constructed of Gray composite product
For Speed 400 motor applications
Two adapter rings that adapt to different motor shafts

CONSISTS OF:
6x4 Speed 400 Electric Pusher Propeller, 2 adapter rings and
    instruction sheet

REQUIRES:
Assembly onto motor shaft or gear drive unit in Electric airplane

SPECS:
Diameter: 6"
Pitch: 4
Center inner size: 0.24" (6mm) where rings are set up
Inner Diameter of Rings: 0.188" (4.8mm) and 0.236" (6mm)

Here is a wonderful item that many others have bought at the same time.



This is a 6x5.5E Thin Composite Propeller from Advanced Precision Composites.
For utilize on Electric powered airplane only (not for glow engines).

FEATURES:
Gray composite building

CONSISTS OF:
One 6x5.5E Thin Electric Propeller

REQUIRES:
ALL props need balancing, this is VERY important, utilize TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Diameter: 6"
Pitch: 5.5
Center inner size: 0.25"

Often acquired with the item that you are currently reviewing.

Prop Adapter with Collet, 2mm




Here is a wonderful item that many others have bought at the same time.

Rimfire Prop Saver 28mm Motors

This is the ElectriFly Rimfire Prop Saver for usage on 28mm Motors.

FEATURES:
Aluminum building

CONSISTS OF:
One Prop Saver
Two Rubber O-Rings
Two Bushings

REQUIRES:
Setup on Rimfire 28mm Motor

Here is one more item that praises the item being talked about.

Nylon Kwik-Link On 12" 2-56 Rod (5/Pkg)

These are Threaded Rods with Nylon Kwik Links.

FEATURES:
Steel rod building w/ 2-56 threads
Nylon clevis building

CONSISTS OF:
Five steel threaded rods 12" long, thread length 3/4", .072" size
Five 2-56 nylon clevises 7/8" long

SPECS:
See "Includes" above

COMMENTS:
For bulk qty of 12, utilize DUBQ1580.

The listed below item likewise sets actually well with the item being talked about.

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon building

CONSISTS OF:
Two control horns w/4 adjusting holes and 2 mounting holes
(3/4" long [tall])
Two mounting plates w/2 mounting holes (3/8"x3/8")
Four 2-56x3/8" round head screws

REQUIRES:
A flat head (slotted) screwdriver

SPECS:
See "consists of" above

Here is a wonderful item that many others have bought at the same time.

Ultra Plug, Female (2Pk)

These are 2 W.S. Deans 2-Pin Female Ultra Plug Connectors.

FEATURES:
Gets rid of the possibility of reverse polarity connections
Low resistance, compact size
Offers a safe connection for battery and motor connections on
    R/C vehicles

CONSISTS OF:
Two WS Deans 2-Pin Female Ultra Plug Connectors with section of
    shrink tubing

REQUIRES:
Soldering connectors onto wires
Soldering iron HCAR0776
Solder STAR2000

COMMENTS:
For Male end usage WSDM1302
For both Male and Female usage WSDM3001