APC 6x4 Thin Electric Prop

This is a 6x4E Thin Composite propeller from Advanced Accuracy Composites.
For utilize on Electric powered aircraft just (not for radiance engines).

FUNCTIONS:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with 2 adapter rings that adapt to different motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
2 composite adapter rings
One direction sheet

NEEDS:
Assembly onto motor or equipment drive device in your Electric plane.
Balancing

SPECIFICATIONS:
Size: 6"
Pitch: 4
Center inner diameter: 0.25"

COMMENTS:
Use Speed 400 Electric motors.

This item is often bought with the above pointed out item.

6x4 Speed 400 Electric Pusher Prop

This is a 6x4 Speed 400 Electric Pusher Propeller
from Advanced Accuracy Composites.
For utilize on Electric powered aircraft just, not for radiance powered engines.

FEATURES:
Constructed of Gray composite product
For Speed 400 motor applications
2 adapter rings that adapt to different motor shafts

CONSISTS OF:
6x4 Speed 400 Electric Pusher Propeller, 2 adapter rings and
    direction sheet

NEEDS:
Assembly onto motor shaft or equipment drive device in Electric airplane

SPECIFICATIONS:
Size: 6"
Pitch: 4
Center inner diameter: 0.24" (6mm) where rings are set up
Inner Size of Rings: 0.188" (4.8mm) and 0.236" (6mm)

Below is a great item that numerous others have actually purchased the exact same time.



This is a 6x5.5E Thin Composite Propeller from Advanced Accuracy Composites.
For utilize on Electric powered aircraft just (not for radiance engines).

FUNCTIONS:
Gray composite construction

CONSISTS OF:
One 6x5.5E Thin Electric Propeller

NEEDS:
ALL props need balancing, this is VERY important, utilize TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Size: 6"
Pitch: 5.5
Center inner diameter: 0.25"

Regularly bought with the item that you are currently checking out.

Prop Adapter with Collet, 2mm




Below is a great item that numerous others have actually purchased the exact same time.

Rimfire Prop Saver 28mm Motors

This is the ElectriFly Rimfire Prop Saver for use on 28mm Motors.

FEATURES:
Aluminum construction

CONSISTS OF:
One Prop Saver
2 Rubber O-Rings
2 Bushings

NEEDS:
Installation on Rimfire 28mm Motor

Below is an additional item that compliments the item being gone over.

Nylon Kwik-Link On 12" 2-56 Rod (5/Pkg)

These are Threaded Rods with Nylon Kwik Links.

FEATURES:
Steel rod construction w/ 2-56 threads
Nylon clevis construction

CONSISTS OF:
5 steel threaded rods 12" long, thread length 3/4", .072" diameter
5 2-56 nylon clevises 7/8" long

SPECIFICATIONS:
See "Consists of" above

COMMENTS:
For bulk qty of 12, utilize DUBQ1580.

The listed below item also sets really well with the item being gone over.

Control Horn Nylon 1/2A (2)

These are 1/2A T-Style Control Horns.

FEATURES:
Nylon construction

CONSISTS OF:
2 control horns w/4 changing holes and 2 installing holes
(3/4" long [tall])
2 installing plates w/2 installing holes (3/8"x3/8")
4 2-56x3/8" round head screws

NEEDS:
A flat head (slotted) screwdriver

SPECIFICATIONS:
See "consists of" above

Below is a great item that numerous others have actually purchased the exact same time.

Ultra Plug, Female (2Pk)

These are 2 W.S. Deans 2-Pin Female Ultra Plug Connectors.

FEATURES:
Removes the possibility of reverse polarity connections
Low resistance, compact size
Supplies a secure connection for battery and motor connections on
    R/C vehicles

CONSISTS OF:
2 WS Deans 2-Pin Female Ultra Plug Connectors with section of
    diminish tubing

NEEDS:
Soldering ports onto wires
Soldering iron HCAR0776
Solder STAR2000

COMMENTS:
For Male end use WSDM1302
For both Male and Female use WSDM3001