APC 6x4 Speed 400 Electric Pusher Prop

This is a 6x4 Speed 400 Electric Pusher Propeller
from Advanced Precision Composites.
For use on Electric powered aircraft only, not for glow powered engines.

FEATURES:
Constructed of Gray composite product
For Speed 400 motor applications
2 adapter rings that adapt to various motor shafts

CONSISTS OF:
6x4 Speed 400 Electric Pusher Propeller, two adapter rings and
    guideline sheet

NEEDS:
Assembly onto motor shaft or equipment drive unit in Electric plane

SPECIFICATIONS:
Diameter: 6"
Pitch: 4
Hub inner size: 0.24" (6mm) where rings are set up
Inner Diameter of Rings: 0.188" (4.8mm) and 0.236" (6mm)

Lots of others have acquired this thing along with the thing that you are currently checking out.

6x4 Thin Electric Prop

This is a 6x4E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered aircraft only (not for glow engines).

FUNCTIONS:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with two adapter rings that adapt to various motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
2 composite adapter rings
One guideline sheet

NEEDS:
Assembly onto motor or equipment drive unit in your Electric plane.
Balancing

SPECIFICATIONS:
Diameter: 6"
Pitch: 4
Hub inner size: 0.25"

COMMENTS:
Use Speed 400 Electric motors.

Lots of others have acquired this thing along with the thing that you are currently checking out.

Tower Pro SG90 Servo

Functions:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Requirements:
Dimension : 23mm x 12mm x 29mm
Port Wire Length : About 248mm
Operating Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature Range : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packing content:
1 x 9g TITAN Servo Sets (with accessories)

Often acquired with the thing that you are currently checking out.

A2212-6 2200Kv Brushless Outrunner Motor, 3.17 mm Shaft, 3.5mm B

Requirements

Cells: 5-7 Nimh 2-3 Lipo
RPM/V: 2200Kv
Max Effectiveness: 14-22 A
No Load Existing: 1.4 A
Current Capability: 28A/60s
Shaft Diameter: 3mm
Weight: 47 g
Measurements: 27.5mm x 30 mm

Recomended Model Weight: 300-1000g
Recomended Prop; 2s Lipo 7 x 5 - 3s Lipo 5 x 5

Here is a terrific thing that numerous others have bought at the exact same time.

Rimfire Prop Saver 28mm Motors

This is the ElectriFly Rimfire Prop Saver for usage on 28mm Motors.

FEATURES:
Aluminum building

CONSISTS OF:
One Prop Saver
2 Rubber O-Rings
2 Bushings

NEEDS:
Setup on Rimfire 28mm Motor

This thing is frequently acquired with the above discussed thing.

Prop Saver Rubberbands/O-Rings (4)

These are the Prop Saver Rubber Bands for the Great Planes Yak 55 EP ARF

FUNCTIONS:
Twists around the Prop to hold it on and secure it during crashes

CONSISTS OF:
(4) Rubber Bands

Here is one more thing that praises the thing being discussed.

Mini E/Z Connector 2/Pkg

These are Mini E-Z Connectors for Park Flyers by Dubro.

FEATURES:
Aluminum Building and construction

CONSISTS OF:
2 Connectors
2 Screws
2 Washers

NEEDS:
Absolutely nothing

SPECIFICATIONS:
Length: 4.8mm (3/16")
Diameter: 3.2mm (1/8")
Weight: 0.25g (0.0088oz)

COMMENTS:
Optimum pushrod size is .047 - 3/64" (1.22mm)