APC 6x4 Speed 400 Electric Pusher Prop

This is a 6x4 Speed 400 Electric Pusher Propeller
from Advanced Accuracy Composites.
For utilize on Electric powered aircraft only, not for radiance powered engines.

FEATURES:
Constructed of Gray composite material
For Speed 400 motor applications
Two adapter rings that adapt to various motor shafts

INCLUDES:
6x4 Speed 400 Electric Pusher Propeller, 2 adapter rings and
    direction sheet

REQUIRES:
Assembly onto motor shaft or equipment drive system in Electric plane

SPECS:
Size: 6"
Pitch: 4
Center inner diameter: 0.24" (6mm) where rings are installed
Inner Size of Rings: 0.188" (4.8mm) and 0.236" (6mm)

Many others have actually gotten this item along with the item that you are presently reading about.

6x4 Thin Electric Prop

This is a 6x4E Thin Composite propeller from Advanced Accuracy Composites.
For utilize on Electric powered aircraft only (not for radiance engines).

FUNCTIONS:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with 2 adapter rings that adapt to various motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
Two composite adapter rings
One direction sheet

REQUIRES:
Assembly onto motor or equipment drive system in your Electric plane.
Balancing

SPECS:
Size: 6"
Pitch: 4
Center inner diameter: 0.25"

REMARKS:
Use Speed 400 Electric motors.

Many others have actually gotten this item along with the item that you are presently reading about.

Tower Pro SG90 Servo

Features:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specifications:
Dimension : 23mm x 12mm x 29mm
Connector Wire Length : About 248mm
Operating Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature level Range : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packing content:
1 x 9g TITAN Servo Sets (with devices)

Regularly gotten with the item that you are presently reading about.

A2212-6 2200Kv Brushless Outrunner Motor, 3.17 mm Shaft, 3.5mm B

Specifications

Cells: 5-7 Nimh 2-3 Lipo
RPM/V: 2200Kv
Max Performance: 14-22 A
No Load Present: 1.4 A
Current Capacity: 28A/60s
Shaft Size: 3mm
Weight: 47 g
Dimensions: 27.5mm x 30 mm

Recomended Design Weight: 300-1000g
Recomended Prop; 2s Lipo 7 x 5 - 3s Lipo 5 x 5

Below is a terrific item that many others have actually bought at the very same time.

Rimfire Prop Saver 28mm Motors

This is the ElectriFly Rimfire Prop Saver for use on 28mm Motors.

FEATURES:
Aluminum building

INCLUDES:
One Prop Saver
Two Rubber O-Rings
Two Bushings

REQUIRES:
Setup on Rimfire 28mm Motor

This item is often gotten with the above discussed item.

Prop Saver Rubberbands/O-Rings (4)

These are the Prop Saver Rubber Bands for the Great Planes Yak 55 EP ARF

FUNCTIONS:
Wraps around the Prop to hold it on and safeguard it throughout crashes

INCLUDES:
(4) Rubber Bands

Below is another item that compliments the item being gone over.

Mini E/Z Connector 2/Pkg

These are Mini E-Z Connectors for Park Flyers by Dubro.

FEATURES:
Aluminum Building

INCLUDES:
Two Connectors
Two Screws
Two Washers

REQUIRES:
Absolutely nothing

SPECS:
Length: 4.8mm (3/16")
Size: 3.2mm (1/8")
Weight: 0.25g (0.0088oz)

REMARKS:
Optimum pushrod diameter is .047 - 3/64" (1.22mm)