APC 5.5x4.5EP Speed 400 Elec Push Prop

This is a 5.5x4.5 Speed 400 Electric Propeller
from Advanced Accuracy Composites.
For utilize on Electric powered aircraft only, not for radiance powered engines.

FEATURES:
Constructed of Gray composite material
For Speed 400 motor applications
Two adjuster rings that adapt to various motor shafts

CONSISTS OF:
5.5x4.5 Speed 400 Electric Propeller, two adapter rings and
    guideline sheet

REQUIRES:
Assembly onto motor shaft or gear drive system in Electric airplane

SPECS:
Size: 5.5"
Pitch: 4.5
Center inner diameter: 0.24" (6mm) where rings are installed
Inner Size of Rings: 0.188" (4.8mm) and 0.236" (6mm)

Here is another thing that praises the thing being discussed.

5.5x4.5 Speed 400 Electric Propeller

This is a 5.5x4.5E thin composite propeller from Advanced Accuracy Composites.
For utilize on Electric powered aircraft only (not for radiance engines).

FUNCTIONS:
Gray composite propeller blades that put together onto a propeller hub.
Comes with two adjuster rings that adapt to various motor shafts.
Comes in a bag attached to a header card

CONSISTS OF:
One composite propeller
Two composite adapter rings
One guideline sheet

REQUIRES:
ALL props require balancing (usage TOPQ5700)
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Size: 5.5"
Pitch: 4.5
Center inner diameter: 0.25"

COMMENTS:
Use Speed 400 electric motors.

This thing praises the main item right here.



This is the 20g bottle of Great Planes Pro Foam Safe Thin CA Glue.

FEATURES:
Perfect adhesive for last assembly on foam model aircraft
Odorless and non-fuming and compatible with Pro CA Activator
    (GPMR6034 GPMR6035 GPMR6036)
Thin formula establishes quickest of all thicknesses
"Finest if Used By..." date always insures freshness and best
performance

CONSISTS OF:
One 20g bottle of Great Planes Pro Foam Safe Thin
    CA (CyanoAcrylate) Glue

REQUIRES:
Using to one side of item needing to be joined and holding for
    10-15 seconds

COMMENTS:
"Finest If Used By" date on bottom of bottle

The listed below thing likewise sets really well with the thing being discussed.

Prop Adapter with Collet, 3mm


Tech Notes


Use on motors with 3mm diameter output shafts.
Collet threads are 4.5mm in diameter.