APC 12x6 Sport Propeller

This is a 12x6 Airplane Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design offers these props a thinner profile
    and more "bite" with less noise.
Lightweight formed nylon construction minimizes turning mass for
    higher output and longer life.
Reinforcing carbon fibers help keep real, constant pitch at
    Any RPM.
"C2" design (see REMARKS).

INCLUDES:
One Carbon-Reinforced NYLON Propeller

REQUIRES:
ALL props require balancing, this is ESSENTIAL, use TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or FOXQ1520 (Metric)

SPECS:
Length: 12" Pitch: 6
Density at hub: 1/2" Hole diameter: 1/4"

REMARKS:
The "C2" stands for the production run in which it was made.

Get this item to improve the one you are reading about.

11x6 Sport Propeller

This is a 11x6 Airplane Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design offers these props a thinner profile
    and more "bite" with less noise.
Lightweight formed nylon construction minimizes turning mass for
    higher output and longer life.
Reinforcing carbon fibers help keep real, constant pitch at
    any rpm.
"C2" design (see REMARKS).

INCLUDES:
One Carbon-Reinforced NYLON Propeller

REQUIRES:
ALL props require balancing, this is ESSENTIAL, use TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 11" Pitch: 6
Density at hub: 1/2" Hole diameter: 1/4"

REMARKS:
The "C2" mean the production run in which this prop was made.

The below item additionally sets really well with the item being reviewed.

13x6 Sport Propeller

This is a 13x6 Airplane Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design offers these props a thinner profile
    and more "bite" with less noise.
Lightweight formed nylon construction minimizes turning mass for
    higher output and longer life.
Reinforcing carbon fibers help keep real, constant pitch at
    any rpm.
"C2" design (see REMARKS).

INCLUDES:
One Carbon-Reinforced NYLON Propeller

REQUIRES:
ALL props require balancing, this is ESSENTIAL, use TOPQ5700.
May requirement prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 13" Pitch: 6
Density at hub: 1/2" Hole diameter: 1/4"

REMARKS:
The "C2" stands for the production run in which the prop was made.

This is a wonderful addition to the item presently being reviewed.

2 1/4" Spinner (2 Blade) Black

This is the Dubro 2-1/4" Size Black Spinner.

FEATURES:
Constructed of 100% Virgin Nylon for optimum strength.
Pre-trimmed for 2 blade propeller.
Uses a unique nylon insert lock design for attaching the backplate
    and spinner-giving a solid and secure hold.
Four shaft adapters, 6mm, 1/4", 7mm, 5/16", removes have to drill
    out backplates.

INCLUDES:
One Dubro 2-1/4" Size Black Spinner with backplate, four shaft
    adapters, and 2 3.5mm x 18mm socket head cap screws.

REQUIRES:
Lining up pins in nose cone to backplate and fastening into pre-
    set up locknuts with the 2 socket head cap screws.
7/64" ball driver

SPECS:
Size: 2.25" (57mm) at base
Length: 2.44" (62mm) from backplate to tip