APC 12x6 Sport Propeller

This is a 12x6 Plane Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design offers these props a thinner profile
    and more "bite" with less noise.
Lightweight formed nylon building and construction decreases rotating mass for
    greater output and longer life.
Reinforcing carbon fibers help keep true, consistent pitch at
    Any RPM.
"C2" design (see REMARKS).

CONSISTS OF:
One Carbon-Reinforced NYLON Propeller

NEEDS:
ALL props require balancing, this is VERY important, use TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or FOXQ1520 (Metric)

SPECIFICATIONS:
Length: 12" Pitch: 6
Thickness at hub: 1/2" Hole size: 1/4"

REMARKS:
The "C2" stands for the production run in which it was made.

Get this product to improve the one you read around.

11x6 Sport Propeller

This is a 11x6 Plane Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design offers these props a thinner profile
    and more "bite" with less noise.
Lightweight formed nylon building and construction decreases rotating mass for
    greater output and longer life.
Reinforcing carbon fibers help keep true, consistent pitch at
    any rpm.
"C2" design (see REMARKS).

CONSISTS OF:
One Carbon-Reinforced NYLON Propeller

NEEDS:
ALL props require balancing, this is VERY important, use TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 11" Pitch: 6
Thickness at hub: 1/2" Hole size: 1/4"

REMARKS:
The "C2" mean the production run in which this prop was made.

The below product also pairs truly well with the product being discussed.

13x6 Sport Propeller

This is a 13x6 Plane Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design offers these props a thinner profile
    and more "bite" with less noise.
Lightweight formed nylon building and construction decreases rotating mass for
    greater output and longer life.
Reinforcing carbon fibers help keep true, consistent pitch at
    any rpm.
"C2" design (see REMARKS).

CONSISTS OF:
One Carbon-Reinforced NYLON Propeller

NEEDS:
ALL props require balancing, this is VERY important, use TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 13" Pitch: 6
Thickness at hub: 1/2" Hole size: 1/4"

REMARKS:
The "C2" means the production run in which the prop was made.

This is a great addition to the product currently being discussed.

2 1/4" Spinner (2 Blade) Black

This is the Dubro 2-1/4" Diameter Black Spinner.

FEATURES:
Constructed of 100% Virgin Nylon for maximum strength.
Pre-trimmed for two blade propeller.
Uses a unique nylon insert lock design for attaching the backplate
    and spinner-giving a solid and safe and secure hold.
Four shaft adapters, 6mm, 1/4", 7mm, 5/16", removes need to drill
    out backplates.

INCLUDES:
One Dubro 2-1/4" Diameter Black Spinner with backplate, 4 shaft
    adapters, and two 3.5mm x 18mm socket head cap screws.

REQUIRES:
Aligning pins in nose cone to backplate and securing into pre-
    set up locknuts with the two socket head cap screws.
7/64" ball driver

SPECIFICATIONS:
Diameter: 2.25" (57mm) at base
Length: 2.44" (62mm) from backplate to tip