APC 12x6 Sport Propeller

This is a 12x6 Aircraft Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design provides these props a thinner profile
    and more "bite" with less noise.
Lightweight formed nylon construction decreases turning mass for
    higher output and longer life.
Reinforcing carbon fibers assist preserve real, constant pitch at
    Any RPM.
"C2" design (see COMMENTS).

CONSISTS OF:
One Carbon-Reinforced NYLON Propeller

NEEDS:
ALL props require balancing, this is ESSENTIAL, use TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or FOXQ1520 (Metric)

SPECIFICATIONS:
Length: 12" Pitch: 6
Thickness at hub: 1/2" Hole size: 1/4"

COMMENTS:
The "C2" stands for the production run in which it was made.

Get this product to boost the one you are reading about.

11x6 Sport Propeller

This is a 11x6 Aircraft Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design provides these props a thinner profile
    and more "bite" with less noise.
Lightweight formed nylon construction decreases turning mass for
    higher output and longer life.
Reinforcing carbon fibers assist preserve real, constant pitch at
    any rpm.
"C2" design (see COMMENTS).

CONSISTS OF:
One Carbon-Reinforced NYLON Propeller

NEEDS:
ALL props require balancing, this is ESSENTIAL, use TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 11" Pitch: 6
Thickness at hub: 1/2" Hole size: 1/4"

COMMENTS:
The "C2" represent the production run in which this prop was made.

The listed below product likewise sets truly well with the product being talked about.

13x6 Sport Propeller

This is a 13x6 Aircraft Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design provides these props a thinner profile
    and more "bite" with less noise.
Lightweight formed nylon construction decreases turning mass for
    higher output and longer life.
Reinforcing carbon fibers assist preserve real, constant pitch at
    any rpm.
"C2" design (see COMMENTS).

CONSISTS OF:
One Carbon-Reinforced NYLON Propeller

NEEDS:
ALL props require balancing, this is ESSENTIAL, use TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 13" Pitch: 6
Thickness at hub: 1/2" Hole size: 1/4"

COMMENTS:
The "C2" means the production run in which the prop was made.

This is a amazing addition to the product currently being talked about.

2 1/4" Spinner (2 Blade) Black

This is the Dubro 2-1/4" Size Black Spinner.

FEATURES:
Constructed of 100% Virgin Nylon for maximum strength.
Pre-trimmed for two blade propeller.
Uses a unique nylon insert lock design for attaching the backplate
    and spinner-giving a solid and protected hold.
Four shaft adapters, 6mm, 1/4", 7mm, 5/16", eliminates have to drill
    out backplates.

INCLUDES:
One Dubro 2-1/4" Size Black Spinner with backplate, 4 shaft
    adapters, and two 3.5mm x 18mm socket head cap screws.

REQUIRES:
Lining up pins in nose cone to backplate and fastening into pre-
    installed locknuts with the two socket head cap screws.
7/64" ball driver

SPECIFICATIONS:
Size: 2.25" (57mm) at base
Length: 2.44" (62mm) from backplate to tip