APC 12x6 Sport Propeller

This is a 12x6 Plane Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design gives these props a thinner profile
    and more "bite" with less noise.
Lightweight molded nylon building reduces rotating mass for
    higher output and longer life.
Reinforcing carbon fibers help maintain true, constant pitch at
    Any RPM.
"C2" design (see COMMENTS).

CONSISTS OF:
One Carbon-Reinforced NYLON Propeller

REQUIRES:
ALL props require balancing, this is EXTREMELY IMPORTANT, use TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or FOXQ1520 (Metric)

SPECS:
Length: 12" Pitch: 6
Thickness at center: 1/2" Hole size: 1/4"

COMMENTS:
The "C2" stands for the production run in which it was made.

Get this product to enhance the one you read around.

11x6 Sport Propeller

This is a 11x6 Plane Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design gives these props a thinner profile
    and more "bite" with less noise.
Lightweight molded nylon building reduces rotating mass for
    higher output and longer life.
Reinforcing carbon fibers help maintain true, constant pitch at
    any rpm.
"C2" design (see COMMENTS).

CONSISTS OF:
One Carbon-Reinforced NYLON Propeller

REQUIRES:
ALL props require balancing, this is EXTREMELY IMPORTANT, use TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 11" Pitch: 6
Thickness at center: 1/2" Hole size: 1/4"

COMMENTS:
The "C2" represent the production run in which this prop was made.

The listed below product also pairs truly well with the product being discussed.

13x6 Sport Propeller

This is a 13x6 Plane Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design gives these props a thinner profile
    and more "bite" with less noise.
Lightweight molded nylon building reduces rotating mass for
    higher output and longer life.
Reinforcing carbon fibers help maintain true, constant pitch at
    any rpm.
"C2" design (see COMMENTS).

CONSISTS OF:
One Carbon-Reinforced NYLON Propeller

REQUIRES:
ALL props require balancing, this is EXTREMELY IMPORTANT, use TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 13" Pitch: 6
Thickness at center: 1/2" Hole size: 1/4"

COMMENTS:
The "C2" stands for the production run in which the prop was made.

This is a amazing enhancement to the product currently being discussed.

2 1/4" Spinner (2 Blade) Black

This is the Dubro 2-1/4" Size Black Spinner.

FEATURES:
Constructed of 100% Virgin Nylon for maximum strength.
Pre-trimmed for two blade propeller.
Uses a unique nylon insert lock design for attaching the backplate
    and spinner-giving a solid and safe hold.
Four shaft adapters, 6mm, 1/4", 7mm, 5/16", removes have to drill
    out backplates.

INCLUDES:
One Dubro 2-1/4" Size Black Spinner with backplate, four shaft
    adapters, and two 3.5mm x 18mm socket head cap screws.

REQUIRES:
Lining up pins in nose cone to backplate and attaching into pre-
    installed locknuts with the two socket head cap screws.
7/64" ball driver

SPECS:
Size: 2.25" (57mm) at base
Length: 2.44" (62mm) from backplate to tip