APC 11x8 Thin Electric Prop

This is an 11x8E Thin Composite propeller from Advanced Precision Composites.
For utilize on Electric powered aircraft just (not for glow engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with five adjuster rings that adapt to various motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
5 composite adapter rings

REQUIRES:
ALL props require balancing, this is ESSENTIAL, utilize TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Size: 11" (279mm)
Pitch: 8
Center inner diameter: 0.25" (6.3mm)

Right here is a wonderful product that numerous others have purchased the very same time.

11x7 Thin Electric Prop

This is a 11x7E Thin Composite propeller from Advanced Precision Composites.
For utilize on Electric powered aircraft just (not for glow engines).

FEATURES:
Gray composite propeller blades that put together onto a propeller hub.
Comes with five adjuster rings that adapt to various motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
5 composite adapter rings

REQUIRES:
ALL props require balancing, this is ESSENTIAL, utilize TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or GPMQ5006 (Metric)

SPECS:
Size: 11"
Pitch: 7
Center inner diameter: 0.25"

Regularly bought with the product that you are currently reviewing.

Prop Adapter with Collet, 5mm




Right here is a wonderful product that numerous others have purchased the very same time.



Designed for usage with 3 wire Brushless motor systems, this is
    the 3.5mm Gold Bullet Connector Male from Great Planes.

FEATURES:
Gold plated

CONSISTS OF:
Three male bullet connectors

REQUIRES:
Solder and soldering iron - HCAR0776 and STAR2000

SPECS:
Length: .47" (12mm)
Size: .14" (3.5mm) outside

COMMENTS:
For the 3.5mm female port order GPMM3113

Right here is another product that compliments the product being reviewed.



These are Female 2-Pin Flat Red Connectors with 3" wires.
This is likewise referred to as a JST connector.

FEATURES:
Designed for usage with many Park Flyer ElectriFly electronics
Red 2-pin flat port is a BEC-style
Wires are 24 gauge and pre-tinned at ends for simple soldering
One year quality period

CONSISTS OF:
Two Female 2-Pin Red Connectors with 3" wires

REQUIRES:
Soldering to link wires to application

SPECS:
Plug Size-
    Length: 19mm (general)
    Width: 7mm
    Height: 4mm

COMMENTS:
For the male connectors with wire, usage GPMM3106.
This port can be used to replace BEC-type connectors.

The below product additionally pairs actually well with the product being reviewed.

11X8 Electric Pusher

This is a 11x8 Electric Pusher Propeller
from Advanced Precision Composites.
For utilize on electric powered aircraft just, not for glow powered engines.

FEATURES:
Constructed of Gray composite material
5 adjuster rings that adapt to various motor shafts

CONSISTS OF:
11x8EP Thin Electric Pusher Propeller, two adapter rings and
    guideline sheet

REQUIRES:
Assembly onto motor shaft or gear drive device in electric airplane

SPECS:
Size: 11"
Pitch: 8
Center inner diameter: 0.375" (9.5mm) where rings are installed
Inner Size of Rings: 0.128" (3.25mm), 0.158" (4mm), 0.197" (5mm)
0.237" (6mm) and 0.313" (7.95mm)