APC 11x6 Sport Propeller

This is a 11x6 Aircraft Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design gives these props a thinner profile
    and more "bite" with less noise.
Lightweight formed nylon building and construction decreases rotating mass for
    higher output and longer life.
Reinforcing carbon fibers help keep real, consistent pitch at
    any rpm.
"C2" design (see COMMENTS).

CONSISTS OF:
One Carbon-Reinforced NYLON Propeller

REQUIRES:
ALL props require balancing, this is VERY important, utilize TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Length: 11" Pitch: 6
Density at hub: 1/2" Hole size: 1/4"

COMMENTS:
The "C2" represent the production run in which this prop was made.

This thing praises the above reviewed thing.

Prop Adapter with Collet, 1/8"




Want another wonderful thing to compliment the above discussed thing?

12x6 Sport Propeller

This is a 12x6 Aircraft Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design gives these props a thinner profile
    and more "bite" with less noise.
Lightweight formed nylon building and construction decreases rotating mass for
    higher output and longer life.
Reinforcing carbon fibers help keep real, consistent pitch at
    Any RPM.
"C2" design (see COMMENTS).

CONSISTS OF:
One Carbon-Reinforced NYLON Propeller

REQUIRES:
ALL props require balancing, this is VERY important, utilize TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or FOXQ1520 (Metric)

SPECIFICATIONS:
Length: 12" Pitch: 6
Density at hub: 1/2" Hole size: 1/4"

COMMENTS:
The "C2" means the production run in which it was made.

This thing praises the main item here.

3Mm Steel Hex Nuts-Metric

    These are 3mm Hex Nuts from Du-Bro's Car Line (Metric).

FUNCTIONS:
Zinc plated, steel metric hex nuts.
These are designed for usage on R/C cars.

INCLUDES:
(4) Nuts

SPECIFICATIONS:
Size: 3.0mm

Want another wonderful thing to compliment the above discussed thing?

10x7 Sport Propeller

This is a 10x7 Aircraft Propeller. It is a "tractor" (not a "pusher") Prop.

FEATURES:
Computer-optimized design gives these props a thinner profile
    and more "bite" with less noise.
Lightweight formed nylon building and construction decreases rotating mass for
    higher output and longer life.
Reinforcing carbon fibers help keep real, consistent pitch at
    any rpm.
"C2" design (see COMMENTS).

CONSISTS OF:
One Carbon-Reinforced NYLON Propeller

REQUIRES:
ALL props require balancing, this is VERY important, utilize TOPQ5700.
May requirement prop reamer, usage GPMQ5005 (SAE) or FOXQ1520 (Metric)

SPECIFICATIONS:
Length: 10" Pitch: 7
Density at hub: 1/2" Hole Size: 1/4"

COMMENTS:
The "C2" number represent the production run of this propeller.