APC 10X6 Thin Electric Prop

This is a 10x6E Thin Composite propeller from Advanced Precision Composites
For usage on Electric powered airplane

FUNCTIONS:
Gray composite propeller blades that put together onto a propeller hub.
Comes with 5 adapter rings that suit propeller center to allow
for various motor shaft diameters.

INCLUDES:
One composite propeller
Five composite adapter rings
Guideline sheet

REQUIRES:
All props require balancing. The Leading Flite Power Point Propeller
Balancer (TOPQ5700) can be used for this purpose.
If prop reamer required, utilize GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECIFICATIONS:
Size: 10" (250mm)
Pitch: 6
Hub inner size: 0.25" (6.4mm)
Adapter sizes: 3.3mm (1/8"), 4mm (5/32"), 4.9mm (3/16"),
6.0mm (1/4"), 8.0mm (5/16")

COMMENTS:
This propeller ought to not be used on gas or radiance engines.

This item is regularly bought with the above stated item.

11x7 Thin Electric Prop

This is a 11x7E Thin Composite propeller from Advanced Precision Composites.
For utilize on Electric powered airplane only (not for radiance engines).

FUNCTIONS:
Gray composite propeller blades that put together onto a propeller hub.
Comes with 5 adapter rings that adapt to various motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
Five composite adapter rings

REQUIRES:
ALL props require balancing, this is VERY important, utilize TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5006 (Metric)

SPECIFICATIONS:
Size: 11"
Pitch: 7
Hub inner size: 0.25"

Regularly bought with the item that you are presently reading about.



Developed for usage with 3 wire Brushless motor systems, this is
    the 3.5mm Gold Bullet Connector Male from Great Planes.

FEATURES:
Gold plated

CONSISTS OF:
Three male bullet connectors

REQUIRES:
Solder and soldering iron - HCAR0776 and STAR2000

SPECIFICATIONS:
Length: .47" (12mm)
Size: .14" (3.5mm) outside

COMMENTS:
For the 3.5mm female port order GPMM3113

Regularly bought with the item that you are presently reading about.



These are Female 2-Pin Flat Red Connectors with 3" wires.
This is likewise known as a JST connector.

FEATURES:
Developed for usage with most Park Flyer ElectriFly electronics
Red 2-pin flat port is a BEC-style
Wires are 24 gauge and pre-tinned at ends for easy soldering
One year quality warranty

CONSISTS OF:
2 Female 2-Pin Red Connectors with 3" wires

REQUIRES:
Soldering to link wires to application

SPECIFICATIONS:
Plug Size-
    Length: 19mm (overall)
    Width: 7mm
    Height: 4mm

COMMENTS:
For the male connectors with wire, usage GPMM3106.
This port can be used to change BEC-type connectors.

Regularly bought with the item that you are presently reading about.

10x5 Thin Electric Prop

This is a 10x5E Thin Composite propeller from Advanced Precision Composites.
For utilize on Electric powered airplane only (not for radiance engines).

FUNCTIONS:
Gray composite propeller blades that put together onto a propeller hub.
Comes with 5 adapter rings that adapt to various motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
Five composite adapter rings

REQUIRES:
ALL props require balancing, this is VERY important, utilize TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Size: 10"
Pitch: 5
Hub inner size: 0.25"