APC 10X6 Thin Electric Prop

This is a 10x6E Thin Composite propeller from Advanced Precision Composites
For usage on Electric powered aircraft

FUNCTIONS:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with 5 adapter rings that fit into propeller center to enable
for different motor shaft diameters.

INCLUDES:
One composite propeller
5 composite adapter rings
Guideline sheet

REQUIRES:
All props require balancing. The Leading Flite Power Point Propeller
Balancer (TOPQ5700) can be used for this purpose.
If prop reamer needed, utilize GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECIFICATIONS:
Diameter: 10" (250mm)
Pitch: 6
Center inner size: 0.25" (6.4mm)
Adapter sizes: 3.3mm (1/8"), 4mm (5/32"), 4.9mm (3/16"),
6.0mm (1/4"), 8.0mm (5/16")

COMMENTS:
This propeller should not be used on gas or radiance engines.

This thing is often gotten with the above stated thing.

11x7 Thin Electric Prop

This is a 11x7E Thin Composite propeller from Advanced Precision Composites.
For utilize on Electric powered aircraft only (not for radiance engines).

FUNCTIONS:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with 5 adapter rings that adapt to different motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
5 composite adapter rings

REQUIRES:
ALL props require balancing, this is VERY important, utilize TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5006 (Metric)

SPECIFICATIONS:
Diameter: 11"
Pitch: 7
Center inner size: 0.25"

Regularly gotten with the thing that you are currently reviewing.



Designed for usage with 3 wire Brushless motor systems, this is
    the 3.5mm Gold Bullet Adapter Male from Great Planes.

FEATURES:
Gold plated

INCLUDES:
3 male bullet ports

REQUIRES:
Solder and soldering iron - HCAR0776 and STAR2000

SPECIFICATIONS:
Length: .47" (12mm)
Diameter: .14" (3.5mm) outside

COMMENTS:
For the 3.5mm female connector order GPMM3113

Regularly gotten with the thing that you are currently reviewing.



These are Female 2-Pin Flat Red Connectors with 3" wires.
This is likewise known as a JST connector.

FEATURES:
Designed for usage with many Park Leaflet ElectriFly electronics
Red 2-pin flat connector is a BEC-style
Wires are 24 gauge and pre-tinned at ends for simple soldering
One year quality guarantee

INCLUDES:
2 Female 2-Pin Red Connectors with 3" wires

REQUIRES:
Soldering to connect wires to application

SPECIFICATIONS:
Plug Size-
    Length: 19mm (general)
    Width: 7mm
    Height: 4mm

COMMENTS:
For the male ports with wire, usage GPMM3106.
This connector can be used to replace BEC-type ports.

Regularly gotten with the thing that you are currently reviewing.

10x5 Thin Electric Prop

This is a 10x5E Thin Composite propeller from Advanced Precision Composites.
For utilize on Electric powered aircraft only (not for radiance engines).

FUNCTIONS:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with 5 adapter rings that adapt to different motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
5 composite adapter rings

REQUIRES:
ALL props require balancing, this is VERY important, utilize TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Diameter: 10"
Pitch: 5
Center inner size: 0.25"