APC 10X6 Thin Electric Prop

This is a 10x6E Thin Composite propeller from Advanced Accuracy Composites
For use on Electric powered airplane

FEATURES:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with five adapter rings that suit propeller center to enable
for different motor shaft diameters.

INCLUDES:
One composite propeller
Five composite adapter rings
Instruction sheet

NEEDS:
All props require balancing. The Top Flite Power Point Propeller
Balancer (TOPQ5700) can be utilized for this purpose.
If prop reamer required, use GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECS:
Size: 10" (250mm)
Pitch: 6
Hub inner diameter: 0.25" (6.4mm)
Adapter sizes: 3.3mm (1/8"), 4mm (5/32"), 4.9mm (3/16"),
6.0mm (1/4"), 8.0mm (5/16")

REMARKS:
This propeller should not be utilized on gas or radiance engines.

This item is regularly bought with the above mentioned item.

11x7 Thin Electric Prop

This is a 11x7E Thin Composite propeller from Advanced Accuracy Composites.
For use on Electric powered airplane just (not for radiance engines).

FEATURES:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with five adjuster rings that adapt to different motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
Five composite adapter rings

NEEDS:
ALL props require balancing, this is ESSENTIAL, use TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5006 (Metric)

SPECS:
Size: 11"
Pitch: 7
Hub inner diameter: 0.25"

Often bought with the item that you are currently reading about.



Developed for use with 3 wire Brushless motor systems, this is
    the 3.5mm Gold Bullet Port Male from Great Planes.

FEATURES:
Gold plated

INCLUDES:
Three male bullet ports

NEEDS:
Solder and soldering iron - HCAR0776 and STAR2000

SPECS:
Length: .47" (12mm)
Size: .14" (3.5mm) outside

REMARKS:
For the 3.5mm female adapter order GPMM3113

Often bought with the item that you are currently reading about.



These are Female 2-Pin Flat Red Connectors with 3" wires.
This is also called a JST connector.

FEATURES:
Developed for use with a lot of Park Flyer ElectriFly electronics
Red 2-pin flat adapter is a BEC-style
Wires are 24 gauge and pre-tinned at ends for simple soldering
One year quality assurance

INCLUDES:
Two Female 2-Pin Red Connectors with 3" wires

NEEDS:
Soldering to link wires to application

SPECS:
Plug Size-
    Length: 19mm (overall)
    Width: 7mm
    Height: 4mm

REMARKS:
For the male ports with wire, use GPMM3106.
This adapter can be utilized to replace BEC-type ports.

Often bought with the item that you are currently reading about.

10x5 Thin Electric Prop

This is a 10x5E Thin Composite propeller from Advanced Accuracy Composites.
For use on Electric powered airplane just (not for radiance engines).

FEATURES:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with five adjuster rings that adapt to different motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
Five composite adapter rings

NEEDS:
ALL props require balancing, this is ESSENTIAL, use TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Size: 10"
Pitch: 5
Hub inner diameter: 0.25"