APC 10x5 Thin Electric Prop

This is a 10x5E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered airplane only (not for radiance engines).

FUNCTIONS:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with 5 adjuster rings that adapt to various motor shafts.
Comes in a bag attached to a header card.

INCLUDES:
One composite propeller
5 composite adapter rings

REQUIRES:
ALL props need balancing, this is VERY important, use TOPQ5700.
May need prop reamer, usage GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECIFICATIONS:
Diameter: 10"
Pitch: 5
Center inner diameter: 0.25"

Frequently bought with the item that you are currently checking out.

Hc Connector M/F (1) Available Only From

This is the Male/Female Traxxas Connectors Plugs Only (No Wires).

FUNCTIONS:
Shrouded wire connections (no diminish tube needed)
Wide surface area area, gold-plated terminals
Reverse polarity defense makes it impossible to link in reverse
Textured surface area for simple gripping
Compatible with high-current 12-gauge wire
Protect, favorable locking spring packed terminals for constant
    contact
Numerous locking barbs keep terminals protect

INCLUDES:
One black female plastic connector
One black male plastic connector
Two sets of gold metal pins
Direction sheet

REQUIRES:
Soldering wires to the metal pins

This item praises the main item right here.

Prop Adapter with Collet, 4mm




This is a wonderful addition to the item currently being discussed.

10X6 Thin Electric Prop

This is a 10x6E Thin Composite propeller from Advanced Precision Composites
For usage on Electric powered airplane

FUNCTIONS:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with 5 adapter rings that fit into propeller hub to enable
for various motor shaft diameters.

INCLUDES:
One composite propeller
5 composite adapter rings
Direction sheet

REQUIRES:
All props need balancing. The Top Flite Power Point Propeller
Balancer (TOPQ5700) can be utilized for this purpose.
If prop reamer needed, use GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECIFICATIONS:
Diameter: 10" (250mm)
Pitch: 6
Center inner diameter: 0.25" (6.4mm)
Adapter sizes: 3.3mm (1/8"), 4mm (5/32"), 4.9mm (3/16"),
6.0mm (1/4"), 8.0mm (5/16")

REMARKS:
This propeller must not be utilized on gas or radiance engines.

Want another great item to match the above stated item?

Tower Pro SG90 Servo

Functions:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specifications:
Dimension : 23mm x 12mm x 29mm
Port Wire Length : About 248mm
Running Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature Range : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packing content:
1 x 9g TITAN Servo Sets (with accessories)

This item is regularly bought with the above stated item.

10x4.5 Multi Rotor Pusher Propeller

This is the 10x4.5 MR Multi-Rotor Pusher Propeller from APC.
**Not for usage with fuel engines.**

FUNCTIONS:
Created for counterclockwise turning only
Composite nylon construction, gray in color
Specifically created for multi-rotor applications
Bridges the space in between APC's Thin Electric and Slow Leaflet props
MR series is lighter than the Thin Electrics, with a higher RPM
    capability than Slow Flyers

INCLUDES:
10x4.5 MR Multi-Rotor Pusher Propeller from APC

SPECIFICATIONS:
Center Diameter: 0.65" (16.51mm)
Center Density: 0.35" (8.89mm)
Shaft Diameter: 1/4" (6.35mm)
Weight: 0.53oz (15.02g)
Maximum RPM Limitation: 105,000/prop diameter (inches)

REMARKS:
Order APCQ0601 for LPAR06E Adapter Rings