APC 10x5 Thin Electric Prop

This is a 10x5E Thin Composite propeller from Advanced Precision Composites.
For utilize on Electric powered aircraft just (not for glow engines).

FEATURES:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with 5 adjuster rings that adapt to various motor shafts.
Comes in a bag connected to a header card.

INCLUDES:
One composite propeller
Five composite adapter rings

REQUIRES:
ALL props require balancing, this is CRUCIAL, utilize TOPQ5700.
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Size: 10"
Pitch: 5
Hub inner size: 0.25"

Regularly gotten with the item that you are presently reading about.

Hc Connector M/F (1) Available Only From

This is the Male/Female Traxxas Connectors Plugs Just (No Wires).

FEATURES:
Shrouded wire connections (no diminish tube required)
Wide surface area location, gold-plated terminals
Reverse polarity security makes it impossible to link in reverse
Textured surface area for simple gripping
Suitable with high-current 12-gauge wire
Protect, positive locking spring packed terminals for consistent
    contact
Several locking barbs keep terminals secure

CONSISTS OF:
One black female plastic adapter
One black male plastic adapter
2 sets of gold metal pins
Guideline sheet

REQUIRES:
Soldering wires to the metal pins

This item compliments the main item right here.

Prop Adapter with Collet, 4mm




This is a wonderful enhancement to the item presently being discussed.

10X6 Thin Electric Prop

This is a 10x6E Thin Composite propeller from Advanced Precision Composites
For use on Electric powered aircraft

FEATURES:
Gray composite propeller blades that assemble onto a propeller hub.
Comes with 5 adapter rings that fit into propeller center to permit
for various motor shaft diameters.

INCLUDES:
One composite propeller
Five composite adapter rings
Guideline sheet

REQUIRES:
All props require balancing. The Leading Flite Power Point Propeller
Balancer (TOPQ5700) can be utilized for this purpose.
If prop reamer required, utilize GPMQ5005 (SAE) or GPMQ5007 (Metric).

SPECS:
Size: 10" (250mm)
Pitch: 6
Hub inner size: 0.25" (6.4mm)
Adapter sizes: 3.3mm (1/8"), 4mm (5/32"), 4.9mm (3/16"),
6.0mm (1/4"), 8.0mm (5/16")

COMMENTS:
This propeller ought to not be utilized on gas or glow engines.

Want one more wonderful item to match the above pointed out item?

Tower Pro SG90 Servo

Features:
Micro Servo Titan 9g servo
Gear Type : All Nylon Gear
Dead Band Width : 2 usec
Stall Torque : 1.5kg/cm at 4.8V
Operation Voltage : 3.0 - 7.2Volts

Specs:
Dimension : 23mm x 12mm x 29mm
Adapter Wire Length : About 248mm
Running Speed : 0.12sec / 60 degrees (4.8V no load)
Temperature Range : -30 to +60 Degree C
Net weight : about 11g
Color : black

Packaging content:
1 x 9g TITAN Servo Sets (with accessories)

This item is often gotten with the above pointed out item.

10x4.5 Multi Rotor Pusher Propeller

This is the 10x4.5 MR Multi-Rotor Pusher Propeller from APC.
**Not for use with fuel engines.**

FEATURES:
Developed for counterclockwise rotating just
Composite nylon building and construction, gray in color
Specifically developed for multi-rotor applications
Bridges the gap between APC's Thin Electric and Slow Flyer props
MR series is lighter than the Thin Electrics, with a higher RPM
    ability than Slow Flyers

CONSISTS OF:
10x4.5 MR Multi-Rotor Pusher Propeller from APC

SPECS:
Hub Size: 0.65" (16.51mm)
Hub Density: 0.35" (8.89mm)
Shaft Size: 1/4" (6.35mm)
Weight: 0.53oz (15.02g)
Maximum RPM Limit: 105,000/prop size (inches)

COMMENTS:
Order APCQ0601 for LPAR06E Adapter Rings