APC 10x4.7 Slow Flyer Pusher

This is the APC 10x4.7 Slo-Flyer Pusher Electric Propeller.

FEATURES:
Foe electric and Park-Flyer type aircraft
Pusher propellers molded in the opposite instructions from basic
    propellers, they are developed for airplanes with the motor dealing with
    backwards in the rear of the plane, PUSHING the aircraft forward
Lightweight molded nylon building and construction lowers rotating mass for
    greater output and longer life
Enhancing fibers help keep real, constant pitch at any RPM

INCLUDES:
APC 10x4.7 Slo-Flyer Pusher Electric Propeller
0.236" (5.9mm) and 0.188" (4.8mm) locating rings
Direction sheet

REQUIRES:
ALL props require balancing (use TOPQ5700)
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 10"
Pitch: 4.7"

COMMENTS:
Slo-Flyer props cannot be utilized on glow or fuel powered engines

This is a superb enhancement to the item presently being reviewed.

10x4.7 Slow Flyer Propeller

This is a 10x4.7 Slo-Flyer "tractor" (not a "pusher") aircraft propeller.
This prop produces a great deal of torque even at low speeds.

FEATURES:
Computer-optimized design offers these props a thinner profile and
    more "bite" with less noise.
Lightweight molded nylon building and construction lowers rotating mass for
    greater output and longer life.
Reinforcing carbon fibers help keep real, constant pitch at
    any rpm.
Slo-Flyer propellers work well with Electric powered Park Flyer-type
    aircraft.

INCLUDES:
One carbon-reinforced nylon propeller
One set of little shaft locating rings
One locating ring guideline sheet

REQUIRES:
ALL props require balancing (use TOPQ5700)
May need prop reamer, use GPMQ5005 (SAE) or GPMQ5007 (Metric)

SPECS:
Length: 10"
Pitch: 4.7

COMMENTS:
Slo-Flyer props are Not developed for Radiance engines

You will love this thing if you have the thing earlier stated.

Gold Plated Bullet Connector Female 3.5mm (3)

Created for use with 3 wire Brushless motor systems, this is
the 3.5mm Gold Bullet Connector Female from Excellent Planes.

FEATURES:
Gold plated
Fits wire size as much as 3.5mm

INCLUDES:
Three female bullet connectors

REQUIRES:
Solder and soldering iron - HCAR0776 and STAR2000

SPECS:
Length: .51" (13mm)
Size: .14" (3.5mm) inside (where the wire is soldered to)
Size: .17" (4.25mm) outside

COMMENTS:
For the 3.5mm male adapter order GPMM3112

Want an additional fantastic item to match the above pointed out item?



This is a 17 gram tube of Racers Edge 60/40 Rosin Core Solder. This high quality solder is best for all electronic applications.

This is a superb enhancement to the item presently being reviewed.

2.5Mm X 6 Socket Head Cap Screws (4/Pkg)

Dubro Socket Head Cap Screws are perfect for locations where a screwdriver will not
reach. They can be tighteded with an allen wrench or ball motorist. The screws
can be found in a range of diameters and lengths. This utilizes a 2.5mm balldriver
(BONR1110).

You will love this thing if you have the thing earlier stated.

1/8" (3.1Mm) Heat Shrink Tubing (4 Red & 4 Black / Pkg)

This is a set of 1/8" size Heat Shrink Tubing from Dubro.

FEATURES:
Created to shrink as much as 1/2 of its original size
Ideal for insulating electrical splices, covering electrical plugs
and connectors

INCLUDES:
Four pieces of red heat shrink tubing
Four pieces of black heat shrink tubing

REQUIRES:
Diminish tubing on all sides with heat gun, butane lighter or soldering
iron

SPECS:
Size: 1/8" (3mm)
Length: 1-1/2" (38mm)

COMMENTS:
Use a tubing size that is no more than twice the size of the
item being covered.