Align Torque Tube

Use for T-REX 700 Nitro Pro /700E.
Requirements:
Torque tube x 1
Torque tube end x 2
Bearing MR148ZZ x 2(Φ8xΦ14x4mm)
Torque tube pin guide x 2(Φ8x12.5x7mm)
Pin x 2(Φ2.5x9.8mm)

You will enjoy this product if you have the product earlier stated.

700 Tail Boom Brace

Use for T-REX 700 Nitro Pro /700E.
Requirements:
Tail boom brace end x 4
M4 washer x 4(Φ4xΦ10x1mm)
Tail boom brace x 2(Φ3xΦ6x600mm)
Socket screw x 2(M4x12mm)
Socket screw x 2(M4x16mm)

Want an additional great thing to compliment the above pointed out thing?

Tail Boom/Black

Use for T-REX 700 Nitro Pro /700E.
Requirements:
Aluminum tail boom x 2(Φ20xΦ21.5x785mm)
Tail control guide x 3
Rudder control rod(B) x 1(Φ2x778mm)
Boll link x 2(Φ5x20.5mm)

Get this thing to improve the one you read about.

Torque Tube Bearing Holder Set

Use for T-REX 550E/600E/600Nitor /700E /700Nitro
Requirements:
Torque tube bearing holder x 2(Φ14xΦ20.7x13mm)
Bearing MR148ZZ x 4(Φ8xΦ14x4mm)
EZO Made in Japan

This thing compliments the above talked about thing.

700 Carbon Tail Control Rod Assembly

Use for T-REX 700E.

Requirements:
Tail Control Guide x 1(Φ21.5xΦ26x46.85mm)
Carbon Tail Control Rod x 1(Φ2.7xΦ5x760mm)
Socket button head self tapping screw x 1(T4x10mm)
700NFL Ball Link x 2(Φ5x20.5mm)

This is a superb addition to the thing presently being talked about.

700 105mm Carbon Fiber Tail Blades

This is a set of replacement Carbon Fiber 105mm tail blades. These rigid blades are designed for 90 class helicopters and deliver good 3D efficiency.

Package consists of:

 2 - 105mm carbon fiber blades.





Frequently bought with the thing that you are presently reading about.

Torque Tube Rear Drive Gear Set

Use for T-REX 700E.

Requirements:
Front drive gear assembly x 1(Φ6xΦ7x82.7mm)
Long umbrella gear x 1
Tail Rotor Hub ? 1(Φ12x43.4mm)
M3 Washer ? 2(Φ3xΦ8x1mm)
M4 Set screw ? 1(M4x4mm)
Socket button head screw ? 2(M3x8mm)

The listed below thing likewise sets actually well with the thing being talked about.

700 Tail Rotor Hub H70T002XX

Use for T-REX 700E/700N/800。
Should with: 700 Tail Rotor (H70T001XXW)

Requirements:
700 tail rotor center x 1
Tail rotor washer(Φ8xΦ10x0.3mm) x 4
Washer(Φ3xΦ8x1mm) x 2
M4 set screw x 2(M4x4mm)
Socket collar screw x 2(M3x8mm)
Weight:27.19g

This thing is frequently bought with the above pointed out thing.

Lipo 3300MAh 22.2V 35C - Ultra Power Series

Pulse Batteries – Can You Feel the Power?

Pulse Ultra batteries bring a new level of power to the RC scene, based upon cutting edge lithium polymer innovation, and making the most of all the technological gains within this amazing industry. Pulse is about power & efficiency at a cost that can be afforded. Not does superior power come at a premium price – Pulse delivers it all in one pulse accelerating punch.

Delivering intense power for your RC applications, Pulse batteries deliver everything you could think of at a price never seen. Adding to the addictive power of Pulse Ultra batteries is the 5C charge rate, enabling you to charge in rapid succession, leaving previous 1C LiPo batteries back at the battery charger as you rip through the skies above.

Ranging from 35C, 45C, and mind blowing 65C discharge rates, Pulse has you covered in every method possible, providing mind numbing power levels that will take your flight to a totally new level of extreme. If you're searching for power, you simply discovered it. Pulse delivers intense power for intense pilots, when it pertains to value, Pulse merely can't be beat.
Feel the pulse, and get hold of a new Pulse Ultra Battery for your 3D demands!


Requirements:
Voltage: 22.2V
Cell Count: 6S
Capability: 3300mAh
Discharge Rate: 35C
Measurements: 137mm x 42.25mm x 42.50mm (LxWxH)
Weight:
Balance Tap: JST-XH


Item Note:
Pulse batteries do not had power leads, and will need the end user to solder their own design of battery connector for the battery to be correctly utilized. Pulse batteries feature bare leads covered with heat diminish security, and are prepared for the connector of choice to be soldered to the positive/negative leads.