Align Torque Tube

Use for T-REX 600/600 Nitro
550E DFC
***Does not fit 550L Dominator.

Includes
Torque tube x 1
Bearing MR148ZZ x 1(F8xF14x4mm)

This thing compliments the above talked about thing.

Tail Boom (Black)

Specs:
Tail boom x 2(Φ20xΦ21.5x625mm)
Tail control guide x 2
Rudder control rod(B) x 1(Φ2x657mm)
Boll link x 2

Numerous others have actually purchased this thing along with the thing that you are currently reviewing.

M0.8 Torque Tube Front Drive Gear Set/34T

Use for T-REX 600PRO/600EFL PRO/550E

Specifications:
600PRO Front drive gear assembly x 1
600PRO Short umbrella gear x 1
600PRO Long umbrella gear x 1

Get this thing to enhance the one you read around.

Torque Tube Rear Drive Gear Set

Use for T-REX 550/600 class.

Specs:
Tail rotor shaft assembly x 1
Long umbrella gear x 1

This is a amazing enhancement to the thing currently being talked about.

600 Carbon Fiber Tail Boom-Matte Black H60T003XX

Use for T-REX 550/600/600 Nitro.
T-REX 550 Must with Tail Boom Brace(H60052A)、
Torque Tube(H60119-1)、
600 Carbon Tail Control Rod AssemblyH60221)

Specs:
600 carbon fiber tail boom x 1(Φ20.3xΦ21.5x625mm)

This thing compliments the main item right here.

Torque Tube Bearing Holder Set

Use for T-REX 550E/600E/600Nitor /700E /700Nitro
Specs:
Torque tube bearing holder x 2(Φ14xΦ20.7x13mm)
Bearing MR148ZZ x 4(Φ8xΦ14x4mm)
EZO Made in Japan

Frequently purchased with the thing that you are currently reviewing.

M0.8 Torque Tube Front Drive Gear Set (34T)

This is an Align M0.8, 34 Tooth Torque Tube Front Drive Gear Set, and is meant for usage with the Align T-Rex 550 V2 and 600 Pro helicopters.
Includes:
(1) Modulus: 0.8 Front drive gear assembly (4x4.5x51mm)
(1) Front umbrella gear (20T) (21.2x33.6mm)
(1) Tail umbrella gear (20T) (21.2x12.5mm)

Note: In order to utilize this torque tube drive gear set on a T-REX 550, the helicopter must be equipped with the inclined gear setup. To determine if your helicopter uses inclined gears or straight-cut gears, observe the primary drive gear which will either have actually inclined or straight-cut teeth.



Frequently purchased with the thing that you are currently reviewing.

Skid Pipe

Apply to T-REX 550E.

Specs:
Skid pipeline x 2(Φ7.4xΦ9x294mm)
Skid pipeline end cap x 4

This thing compliments the above talked about thing.

Tail Boom-Dark Metal Gray

Specs:
Tail boom x 2(Φ20xΦ21.5x625mm)
Tail control guide x 2
Rudder control rod x 1(Φ2x539mm)
Ball link x 2

This thing is frequently purchased with the above discussed thing.

600/700DFC Linkage Rod Set

Use for T-REX 600DFC(H60239A).
Use for T-REX 700DFC(H70089A).

Specs:
700DFC Linkage rod A ? 4(M3x14mm)
Elevator ball link ? 4

Right here is one more thing that compliments the thing being talked about.

600 Tail Torque Tube Unit

Appropriate for T-REX 550/600.

Specs:
Metal plate(L) ? 1
Metal plate(R) ? 1
Tail device set ? 1
Tail rotor shaft assembly set ? 1
Bearing MR105ZZ ? 2(Φ5xΦ10x4mm)
Bearing 6701ZZ ? 2(Φ12xΦ18x4mm)
Socket screw ? 4(M3x6mm)
Socket screw ? 1(M3x20mm)
Vertical stabolizer mount ? 1
Socket collar screw ? 2(M3x22mm)
M3 Specialized washer ? 2(Φ3xΦ8x2mm)
Collar ? 1(Φ12.4xΦ18x10mm)
I-shaped Arm ? 1
Mount Link ? 1
Bearing holder ? 1(13.5x12.5x9.5mm )
Linkage ball A(M2x3.5) ? 1(Φ4.75x8.18mm)
Tail control arm ? 1
Bearing holder ? 1(Φ7x Φ8.3x3.5mm)
Bearing F682XZZ ? 6(Φ2.5xΦ7.1xΦ2.6mm)
Bearing MR117ZZ ? 2(Φ7xΦ11xΦ3mm)
Socket button head screw ? 1(M3x5mm)
Socket button head screw ? 6(M2.5x5mm)
Slider Shaft ? 1(Φ8x7x17.6)